2716046 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  4
• Color
  gray
• Maximum load current
  32 A (with 4 mm² conductor cross section)
• Shock protection test specification
  IEC 60529:2001-02
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test turns
  135
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Height
  24 mm
• Connection method
  Screw connection
• Conductor cross section solid min.
  0.2 mm²
• Number of positions
  4
• Insulating material
  PA
• Degree of pollution
  3
• Nominal voltage UN
  500 V
• Result of power-frequency withstand voltage test
  Test passed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
4 mm²
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Screw thread
M3
Connection in acc. with standard
CSA
Conductor cross section flexible min.
0.2 mm²
Number of connections
8
Insulating material group
I
Maximum power dissipation for nominal condition
1.02 W
Rated surge voltage
6 kV
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
38 mm
Tightening torque max
0.8 Nm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 9.0
27141120
ECLASS 5.0
27141100
ETIM 4.0
EC001284
UNSPSC 18.0
39121410
Number of levels
1
Flammability rating according to UL 94
V0
Overvoltage category
III
Open side panel
No
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Short circuit stability result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
22 mm
Tightening torque, min
0.6 Nm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
4 mm²
Max. AWG conductor cross section, flexible
12
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 7.0
27141106
ETIM 6.0
EC001284
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121409
ECLASS 4.1
27141100
ETIM 2.0
EC001284
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Nominal cross section
4 mm²
Nominal current IN
32 A
Terminal block mounting
When attaching the product to the mounting surface, please ensure that the housing is not damaged when tightening the center screw
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Short-time current
0.48 kA
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
8 mm
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC001284
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A3
China RoHS
Environmentally Friendly Use Period = 50 years
UNSPSC 11
39121410
UNSPSC 20.0
39121410
2 conductors with same cross section, stranded max.
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ETIM 3.0
EC001284
Conductor cross section AWG min.
24
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²