2716732 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  10
• Color
  gray
• Insulating material
  PA
• Insulating material group
  I
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of temperature-rise test
  Test passed
• Tensile test result
  Test passed
• Short-time current
  1.2 kA
• Shock form
  Half-sine
• Width
  68 mm
• Screw thread
  M4
• Connection in acc. with standard
  CSA
• Number of levels
  1
• Potentials
  5
• Rated surge voltage
  8 kV
• Open side panel
  No
• Result of surge voltage test
  Test passed
• Power frequency withstand voltage setpoint
  2 kV
• Bending test turns
  135
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Static insulating material application in cold
-60 °C
ECLASS 10.0.1
27141120
Number of positions
5
Flammability rating according to UL 94
V2
Maximum power dissipation for nominal condition
1.82 W
Nominal voltage UN
800 V
Back of the hand protection
guaranteed
Shock duration
18 ms
Height
31 mm
Tightening torque max
1.8 Nm
Conductor cross section AWG max.
6
Nominal cross section
10 mm²
Degree of pollution
3
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Number of shocks per direction
3
Length
33 mm
Stripping length
12 mm
Tightening torque, min
1.5 Nm
Conductor cross section solid min.
0.5 mm²
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Connection method
Screw connection
Conductor cross section solid max.
16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
2 conductors with same cross section, solid max.
6 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ETIM 3.0
EC001284
Nominal current IN
57 A
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Conductor cross section flexible min.
0.5 mm²
Max. AWG conductor cross section, flexible
8
2 conductors with same cross section, solid min.
0.5 mm²
2 conductors with same cross section, stranded max.
6 mm²
Internal cylindrical gage
A3
REACh SVHC
Lead 7439-92-1
Result of flexion and pull-out test
Test passed
Result of power-frequency withstand voltage test
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Conductor cross section flexible, with ferrule with plastic sleeve max.
16 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121409
Maximum load current
76 A (with 16 mm² conductor cross section)
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Conductor cross section short circuit testing
10 mm²
Test directions
X-, Y- and Z-axis (pos. and neg.)
Conductor cross section AWG min.
20
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
6 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
6 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ETIM 2.0
EC001284
Surge voltage test setpoint
9.6 kV
Bending test rotation speed
10 rpm
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141106
ETIM 6.0
EC001284
ECLASS 6.0
27141100
ETIM 4.0
EC001284
UNSPSC 11
39121410
UNSPSC 21.0
39121410
ECLASS 4.0
27141100
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
ETIM 7.0
EC001284
UNSPSC 19.0
39121410
ECLASS 5.1
27141100
UNSPSC 18.0
39121410
UNSPSC 7.0901
39121410