2727378 Phoenix Contact Programmable Logic Controllers

Product Details

• Depth
  109 mm
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Transmission speed
  500 kbps
• Number of positions
  4
• Output name
  Motor output
• Nominal current range
  0.2 A ... 3.6 A
• Supply voltage
  24 V DC (via voltage jumper)
• Supply voltage range
  19.2 V DC ... 28.8 V DC (including all tolerances, including ripple)
• Note on weight specifications
  without plug
• Immunity to ESD
  Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 6 kV contact discharge, criterion B, 8 kV air discharge, criterion B
• Immunity to burst
  Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion B; Supply lines: 2 kV; Signal/data lines: 2 kV
• Protection class
  I (МЭК 61140, EN 61140, VDE 0140-1)
• ECLASS 4.1
  27250300
• Height
  224 mm
• Degree of protection
  IP20
• Number
  1
• Permissible conductor cross section
  1 mm² ... 2.5 mm²
• Frequency range
  50 Hz ... 60 Hz
• Overspeed tripping
  ≥ 20 A (after 0.3 seconds)
• Power consumption
  max. 1.2 W (entire device)
Width
63 mm
Ambient temperature (operation)
-25 °C ... 55 °C
Permissible humidity (storage/transport)
10 % ... 85 % (non-condensing)
Note
Notes on operation Line protection for the network supply line, max. 20 A. Observe derating of the POWER-COMBICON connector
Connection method
COMBICON
Designation connection point
Terminal strip X10
Parameterization range
0.2 A ... 3.6 A (steps of 50/100/200 mA, via fieldbus)
Connection technology
COMBICON
Net weight
500 g
Ambient temperature (storage/transport)
-25 °C ... 85 °C
Air pressure (operation)
70 kPa ... 106 kPa (up to 2000 m above sea level)
Designation
Segment circuit supply (US)
Transmission physics
Copper
Operating voltage
200 V AC ... 440 V AC
Switching rate
Max. 30 per minute (observe derating)
Type of contact
Solid-state contact
Current consumption
max. 50 mA
Mounting type
DIN rail
Operating mode
Process data mode with one byte
Mounting position
Panel mounting on horizontal DIN rail
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, field strength: 3 V/m
ECLASS 10.0.1
27242609
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Permissible humidity (operation)
10 % ... 85 % (non-condensing)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27250300
ECLASS 6.0
27242600
Interference emission
Noise emission test as per EN 61000-6-4 Radio interference properties EN 55011 Class A
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27242609
ECLASS 5.1
27242600
ETIM 2.0
EC001433
ETIM 4.0
EC001601
ETIM 6.0
EC001605
UNSPSC 11
43172015
UNSPSC 12.01
43201404
Diagnostics messages
Overcurrent Error message in the diagnostic code (bus) and display via the LED ERR on the module
Max. current carrying capacity
20 A
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 2g, evaluation criterion 1
ECLASS 9.0
27242609
UNSPSC 6.01
43172015
UNSPSC 21.0
32151602
UNSPSC 13.2
32151602
ECLASS 7.0
27242609
ETIM 7.0
EC001605
UNSPSC 19.0
32151602
Assembly instructions
To safeguard sufficient ventilation, ensure that there is an installation clearance of a minimum of 50 cm both above and below.
ETIM 3.0
EC001601
UNSPSC 7.0901
43201404
UNSPSC 20.0
32151602
ECLASS 4.0
27250300
UNSPSC 18.0
32151602
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, supply lines DC: 0.5 kV/0.5 kV (symm./asymm.), criterion B, supply lines AC: 2 kV/4 kV (symm./asymm.)