2774237 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Overvoltage category
  III
• Rated surge voltage
  4 kV
• Maximum power dissipation for nominal condition
  0.77 W (the value is multiplied when connecting multiple levels)
• Open side panel
  No
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Conductor cross section tensile test
  4 mm²
• Tight fit on carrier
  NS 35
• Short circuit stability result
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Connection method
  Screw connection
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section AWG min.
  24
• Cross section with insertion bridge, stranded max.
  2.5 mm²
• 2 conductors with same cross section, solid max.
  1 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  1 mm²
• Tightening torque max
  0.6 Nm
• Permissible humidity (storage/transport)
  30 % ... 70 %
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC000900
UNSPSC 11
39121410
UNSPSC 12.01
39121410
Color
gray
Degree of pollution
3
Connection in acc. with standard
CSA
Maximum load current
15 A (with 4 mm² conductor cross section)
Maximum load current (upper level)
15 A (with 4 mm² conductor cross section)
Result of surge voltage test
Test passed
Surge voltage test setpoint
4.8 kV
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Requirements, voltage drop
≤ 3.2 mV
Result of temperature-rise test
Test passed
Short-time current
0.48 kA
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Width
6.2 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
12
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Internal cylindrical gage
A3
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Screw thread
M3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141128
ETIM 2.0
EC000900
ETIM 3.0
EC000900
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Number of connections
6
Flammability rating according to UL 94
V2
Insulating material group
I
Nominal current IN (upper level)
15 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Tractive force setpoint
60 N
Result of voltage-drop test
Test passed
Result of aging test
Test passed
Length
72.5 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded max.
1 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Stripping length
8 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 9.0
27141128
ETIM 4.0
EC000900
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
Number of levels
3
Insulating material
PA
Nominal current IN
15 A
Nominal voltage UN
250 V
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.5 kV
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Setpoint
1 N
Requirement, voltage drop 2nd level
≤ 6.4 mV
Result of thermal test
Test passed
Relative insulation material temperature index (Elec.; UL 746 B)
125 °C
Height NS 35/7,5
54.5 mm
Height NS 35/15
62 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Tightening torque, min
0.5 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141128
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ECLASS 7.0
27141128
ETIM 7.0
EC000900
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410