2775016 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Degree of pollution
  3
• Maximum power dissipation for nominal condition
  1.02 W
• Back of the hand protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• Width
  6.2 mm
• Note
  Terminal point
• Screw thread
  M3
• Conductor cross section AWG max.
  10
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• 2 conductors with same cross section, solid min.
  0.2 mm²
• Internal cylindrical gage
  A3
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.1
  27141100
• ECLASS 7.0
  27141120
• UNSPSC 6.01
  30211811
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
Potentials
1
Insulating material
PA
Color
gray
Insulating material group
I
Nominal current IN
32 A (with 6 mm² conductor cross section)
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Setpoint
1 N
Conductor cross section short circuit testing
6 mm²
Length
63.5 mm
Height NS 35/15
54.5 mm
Height NS 32
52 mm
Connection in acc. with standard
CSA
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 2.0
EC000897
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Nominal cross section
4 mm²
Maximum load current
32 A (In the case of a 6 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors)
Open side panel
Yes
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Height NS 35/7,5
47 mm
Tightening torque max
0.6 Nm
Conductor cross section AWG min.
24
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27141100
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
Number of positions
1
Flammability rating according to UL 94
V2
Overvoltage category
III
Shock protection test specification
IEC 60529:1989-11 + AMD 1:1999-11 + AMD 2:2013-08
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Tight fit on carrier
NS 32/NS 35
Proof of thermal characteristics (needle flame) effective duration
30 s
End cover width
1.5 mm
Connection
1 level
Tightening torque, min
0.5 Nm
Conductor cross section solid max.
6 mm²
Max. AWG conductor cross section, flexible
12
Cross section with insertion bridge, solid max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Number of connections
4
Rated surge voltage
8 kV
Nominal voltage UN
630 V
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Short-time current
0.72 kA
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Connection method
Screw connection
Stripping length
8 mm
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
2 conductors with same cross section, solid max.
1 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410