2775250 Phoenix Contact Terminal Blocks
Part#:2775250
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 48
Dec 23, 2024
1-level terminal block with double connection on both sides, with fitted resistor 499 Ω, ± 0.1%, 0.5 W, TCR ± 10 ppm/K, cross section: 0.2 - 2.5 mm², width: 6.2 mm, color: Gray
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2775250 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Nominal cross section 4 mm²
- Maximum load current 10 mA (the current is determined by the component used)
- Insulating material group I
- Nominal voltage UN 630 V
- Result of flexion and pull-out test Test passed
- Number of connections 4
- Flammability rating according to UL 94 V2
- Degree of pollution 3
- Finger protection guaranteed
- Result of power-frequency withstand voltage test Test passed
- Result of tight fit on support Test passed
- Result of voltage-drop test Test passed
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
- Connection method Screw connection
- Screw thread M3
- Conductor cross section solid min. 0.2 mm²
- Conductor cross section flexible max. 4 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm²
- 2 conductors with same cross section, solid max. 1 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 125°C)
- ECLASS 11.0 27141127
- ECLASS 4.0 27141100
- ETIM 2.0 EC000897
- ETIM 3.0 EC000897
- ETIM 7.0 EC000903
- UNSPSC 18.0 39121410
- Number of levels 1
- Insulating material PA
- Maximum power dissipation for nominal condition 1.02 W
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Result of surge voltage test Test passed
- Bending test turns 135
- Setpoint 5 N
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Length 63.5 mm
- Height NS 35/15 54.5 mm
- Height NS 32 52 mm
- Conductor cross section flexible min. 0.2 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm²
- Cross section with insertion bridge, stranded max. 2.5 mm²
- 2 conductors with same cross section, stranded max. 1.5 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 10.0.1 27141127
- ECLASS 5.1 27141100
- ETIM 4.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 13.2 39121410
- UNSPSC 19.0 39121410
- Color gray
- Overvoltage category III
- Back of the hand protection guaranteed
- Power frequency withstand voltage setpoint 3 kV
- Bending test rotation speed 10 rpm
- Result of temperature-rise test Test passed
- Relative insulation material temperature index (Elec., UL 746 B) 125 °C
- Height NS 35/7,5 47 mm
- Stripping length 8 mm
- Connection in acc. with standard IEC 60947-7-1
- Conductor cross section AWG max. 10
- Min. AWG conductor cross section, flexible 24
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.25 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1 mm²
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 5.0 27141100
- ECLASS 9.0 27141127
- UNSPSC 7.0901 39121410
- UNSPSC 20.0 39121410
- Potentials 1
- Rated surge voltage 6 kV
- Nominal current IN 32 A (the current is determined by the component used)
- Open side panel Yes
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Tensile test result Test passed
- Result of thermal test Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- End cover width 1.5 mm
- Tightening torque, min 0.5 Nm
- Conductor cross section solid max. 6 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm²
- 2 conductors with same cross section, solid min. 0.2 mm²
- 2 conductors with same cross section, stranded min. 0.2 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 1.5 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 4.1 27141100
- ECLASS 7.0 27141127
- UNSPSC 6.01 30211811
- UNSPSC 21.0 39121410
- Bending test conductor cross section/weight 0.2 mm² / 0.2 kg
- Tight fit on carrier NS 35
- Width 6.2 mm
- Connection 1 level
- Tightening torque max 0.6 Nm
- Conductor cross section AWG min. 24
- Max. AWG conductor cross section, flexible 10
- Cross section with insertion bridge, solid max. 2.5 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Internal cylindrical gage A4
- Ambient temperature (assembly) -5 °C ... 70 °C
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 6.0 27141100
- ETIM 6.0 EC000903
- UNSPSC 12.01 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$27.07
Stock:
48
Select Qty:
$27.07
$27.07 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨