2866763 Phoenix Contact Data & Networking Devices

Product Details

• UNSPSC 13.2
  39121004
• Depth
  125 mm
• Degree of protection
  IP20
• Degree of pollution
  2
• Installation height
  5000 m
• Mains buffering time
  > 36 ms (120 V AC)
• Setting range of the output voltage (USet)
  18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
• Derating
  60 °C ... 70 °C (2.5%/K)
• Output power
  240 W
• Typical response time
  < 0.15 s
• Insulation voltage input / PE
  3.5 kV AC (type test)
• Connection method
  Pluggable screw connection
• Conductor cross section solid min.
  0.2 mm²
• Stripping length
  7 mm
• Contact discharge
  4 kV (Test Level 2)
• Standard - Electrical safety
  IEC 60950-1/VDE 0805 (SELV)
• UL approvals
  UL Listed UL 508
• Vibration (operation)
  < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
• Certificate
  IEC 60950-1 (2nd Edition)
• ECLASS 11.0
  27040701
ECLASS 5.0
27049000
ETIM 6.0
EC002540
UNSPSC 12.01
39121004
Installation distance top/bottom
50 mm / 50 mm
Depth with alternative assembly
63 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Frequency range DC
0 Hz
Nominal power consumption
302 VA
Recommended breaker for input protection
10 A ... 20 A (AC: Characteristics B, C, D, K)
Protective circuit/component
Varistor, gas-filled surge arrester
Selective Fuse Breaking (ISFB)
60 A (12 ms)
Feedback voltage resistance
max. 35 V DC
MTBF (IEC 61709, SN 29500)
> 940000 h (25 °C)
Protection class
I
Conductor cross section AWG max.
12
Connection in acc. with standard
CSA
Voltage
10 V (Test Level 3)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Standard - Equipment safety
BG (design tested)
Approval - requirement of the semiconductor industry with regard to mains voltage dips
SEMI F47-0706 Compliance Certificate
ECLASS 10.0.1
27040701
ECLASS 5.1
27049000
ETIM 3.0
EC001039
UNSPSC 7.0901
39121004
UNSPSC 20.0
39121004
Width with alternative assembly
122 mm
Nominal output current (IN)
10 A (-25 °C ... 60 °C, UOUT = 24 V DC)
Connection in series
yes
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Power loss nominal load max.
22 W
Efficiency
> 92.5 % (for 230 V AC and nominal values)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible min.
0.2 mm²
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Test field strength
3 V/m (Test Level 2)
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Standard - Safe isolation
DIN VDE 0100-410
Standard - Approval for medical use
IEC 60601-1, 2 x MOOP
Overvoltage category (EN 62477-1)
III
ECLASS 4.1
27040700
ECLASS 7.0
27049002
ETIM 2.0
EC001039
UNSPSC 11
39121004
Height
130 mm
POWER BOOST (IBoost)
15 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC )
Residual ripple
< 50 mVPP (with nominal values)
Maximum power dissipation in no-load condition
9.1 W
Insulation voltage input/output
4 kV AC (type test)
Insulation voltage output / PE
500 V DC (routine test)
Conductor cross section flexible max.
2.5 mm²
Noise immunity
EN 61000-6-2
Frequency range
0.15 MHz ... 80 MHz
Comments
Criterion B
Shipbuilding approval
DNV GL (EMC B), ABS, LR, RINA, NK, BV
Shock
18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Rail applications
EN 50121-4
ECLASS 4.0
27040700
ETIM 4.0
EC000599
ECLASS 9.0
27040701
UNSPSC 6.01
30211502
UNSPSC 19.0
39121004
Width
60 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Type of protection
Transient surge protection
Nominal output voltage
24 V DC ±1 %
Connection in parallel
Yes, for redundancy and increased capacity
Protection against overvoltage at the output (OVP)
< 35 V DC
Net weight
1.1 kg
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG min.
16
Screw thread
M3
Standards/regulations
EN 61000-6-3
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Standard – Limitation of mains harmonic currents
EN 61000-3-2
DeviceNet approval
DeviceNet™ Power Supply Conformance Tested
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 6.0
27049000
ETIM 7.0
EC002540
UNSPSC 18.0
39121004
UNSPSC 21.0
39121004
Climatic class
3K3 (in acc. with EN 60721)
Dielectric strength maximum
300 V AC
Input voltage range
85 V AC ... 264 V AC
Current consumption
2.2 A (120 V AC)
Power factor (cos phi)
0.85
Installation distance right/left
5 mm / 5 mm
Discharge current to PE
< 3.5 mA
Height with alternative assembly
130 mm
Inrush current
< 15 A
Ambient temperature (start-up type tested)
-40 °C
Nominal input voltage range
100 V AC ... 240 V AC
AC frequency range
45 Hz ... 65 Hz
Input fuse
10 A (slow-blow, internal)