2866802 Phoenix Contact AC/DC Power Supplies

Product Details

• Height
  130 mm
• Ambient temperature (start-up type tested)
  -40 °C
• Installation height
  4000 m
• Input voltage range
  3x 320 V AC ... 575 V AC
• Inrush current
  < 15 A
• Nominal output voltage
  24 V DC ±1 %
• Selective Fuse Breaking (ISFB)
  215 A (12 ms)
• POWER BOOST (IBoost)
  45 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC )
• Feedback voltage resistance
  max. 35 V DC
• Typical response time
  < 0.5 s
• Protection class
  I
• Assembly instructions
  alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
• Conductor cross section solid max.
  6 mm²
• Screw thread
  M3
• Standard – Safety extra-low voltage
  IEC 60950-1 (SELV) and EN 60204-1 (PELV)
• Standard – Limitation of mains harmonic currents
  EN 61000-3-2
• Standard - Equipment safety
  GS (tested safety)
• Low Voltage Directive
  Conformance with Low Voltage Directive 2014/35/EC
• Comments
  Criterion A
• UNSPSC 21.0
  39121004
Width
96 mm
Depth
176 mm
Installation distance right/left
5 mm / 5 mm
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Output power
960 W
Power loss nominal load max.
63 W
Connection method
Screw connection
Conductor cross section AWG min.
18
Stripping length
10 mm
Standard - Electrical safety
IEC 60950-1/VDE 0805 (SELV)
UL approvals
UL Listed UL 508
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Frequency range
0.15 MHz ... 80 MHz
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
Surge voltage load (surge)
EN 61000-4-5
ECLASS 10.0.1
27040701
ECLASS 11.0
27040701
ECLASS 5.0
27049000
ECLASS 5.1
27049000
ETIM 3.0
EC001039
UNSPSC 6.01
30211502
UNSPSC 12.01
39121004
UNSPSC 18.0
39121004
Width with alternative assembly
176 mm
Degree of protection
IP20
Climatic class
3K3 (in acc. with EN 60721)
Degree of pollution
2
Discharge current to PE
< 3.5 mA
Nominal power consumption
1342 VA
Protective circuit/component
Varistor, gas-filled surge arrester
Type of protection
Transient surge protection
Connection in series
yes
Residual ripple
< 40 mVPP (with nominal values)
Net weight
2.5 kg
MTBF (IEC 61709, SN 29500)
> 880000 h (25 °C)
Insulation voltage output / PE
500 V DC (routine test)
Conductor cross section flexible max.
4 mm²
EMC requirements for noise emission
EN 61000-6-3
Rail applications
EN 50121-4
Shipbuilding approval
DNV GL (EMC A), ABS, LR, RINA, NK, BV
Contact discharge
8 kV (Test Level 4)
Input
2 kV (Test Level 3 - symmetrical)
Output
1 kV (Test Level 2 - symmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 4.0
27040700
ECLASS 6.0
27049000
ETIM 2.0
EC001039
ETIM 6.0
EC002540
ETIM 7.0
EC002540
UNSPSC 11
39121004
UNSPSC 19.0
39121004
Depth with alternative assembly
99 mm
Installation distance top/bottom
50 mm / 50 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Nominal input voltage range
3x 400 V AC ... 500 V AC
Frequency range DC
0 Hz
Mains buffering time
> 25 ms (400 V AC)
Power factor (cos phi)
0.76
Derating
60 °C ... 70 °C (2.5%/K)
Protection against overvoltage at the output (OVP)
< 35 V DC
Peak switching voltages nominal load
< 5 mVPP (at nominal values, 20 MHz)
Efficiency
> 94 % (at 400 V AC and nominal values)
Insulation voltage input / PE
3.5 kV AC (type test)
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
10
EMC requirements for noise immunity
EN 61000-6-1
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV) / Overvoltage category III
Electrostatic discharge
EN 61000-4-2
Discharge in air
15 kV (Test Level 4)
Signal
1 kV (Test Level 2 - asymmetrical)
Voltage
10 V (Test Level 3)
Height with alternative assembly
130 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
AC frequency range
45 Hz ... 65 Hz
Current consumption
3x 2.1 A (400 V AC)
Recommended breaker for input protection
6 A ... 16 A (AC: Characteristics B, C, D, K)
Setting range of the output voltage (USet)
18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (IN)
40 A (-25 °C ... 60 °C, UOUT = 24 V DC)
Connection in parallel
Yes, for redundancy and increased capacity
Maximum power dissipation in no-load condition
18 W
Operating voltage display
Green LED
Insulation voltage input/output
4 kV AC (type test)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible min.
0.2 mm²
Standard - Safe isolation
DIN VDE 0100-410
Standard - surge resistance
VDE 0160 (curve W2)
CSA
CAN/CSA-C22.2 No. 60950-1-07
Electromagnetic HF field
EN 61000-4-3
Test field strength
10 V/m (Test Level 3)
I/O/S
asymmetrical
Criterion A
Normal operating behavior within the specified limits.
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27040700
ECLASS 7.0
27049002
ECLASS 9.0
27040701
ETIM 4.0
EC000599
UNSPSC 7.0901
39121004
UNSPSC 13.2
39121004
UNSPSC 20.0
39121004