Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

2903116 Phoenix Contact Electrical Safety Devices

Phoenix Contact 2903116 Hybrid motor starter for reversing 3~ AC motors up to 550 V AC, 0.6 A output current, adjustable overload shutdown and safe emergency stop up to PLe/SIL 3 and SmartWire--DT™adapter as a set.
Phoenix Contact

Part#:2903116

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Get a quick Quote!

Hybrid motor starter for reversing 3~ AC motors up to 550 V AC, 0.6 A output current, adjustable overload shutdown and safe emergency stop up to PLe/SIL 3 and SmartWire--DT™adapter as a set.

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 2903116 Phoenix Contact price in the box on the right side or send a quick quote.

Product Details

  • Ambient temperature (storage/transport)
    -40 °C ... 80 °C
  • Control supply voltage range
    19.2 V DC ... 30 V DC
  • Rated actuating voltage UC
    24 V DC
  • Output name
    Acknowledge output
  • Leakage current
    0 mA
  • Switching frequency
    ≤ 2 Hz (Load-dependent)
  • Maximum power dissipation
    2.5 W
  • Status display
    Yellow LED
  • Connection name
    Load circuit
  • Screw thread
    M3
  • Conductor cross section AWG
    24 ... 14
  • Rated surge voltage
    6 kV
  • Standards/regulations
    IEC 60947-1
  • Width
    22.5 mm
  • Ambient temperature (operation)
    -5 °C ... 55 °C (observe derating)
  • Degree of protection
    IP20
  • Type of protection
    Surge protection
  • Rated actuating current IC
    5 mA
  • Operating voltage range
    42 V AC ... 550 V AC
  • Note
    Confirmation: floating change-over contact, signal contact
  • Motor starter type
    Reversing starter
  • Operating mode
    100% operating factor
  • Minimum power dissipation
    0.88 W
  • Torque
    0.5 Nm ... 0.6 Nm
  • Insulation
    Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC
  • SCCR
    100 kA (480 V AC (fuse: 30 A class CC/30 A class J (high fault)))
  • Group installation
    20 A (class RK5, SCCR 5kA, #24 - 14 AWG max. solid and stranded)
  • ECLASS 10.0.1
    27370905
  • ECLASS 5.0
    27024000
  • ECLASS 9.0
    27370905
  • ETIM 2.0
    EC001037
  • ETIM 7.0
    EC001037
  • UNSPSC 20.0
    25173902
  • Height
    165 mm
  • Maximum altitude
    ≤ 2000 m
  • Triggering voltage range
    19.2 V DC ... 30 V DC
  • Typical turn-off time
    < 30 ms
  • Cooling time
    20 min. (for auto reset)
  • Contact type
    1 changeover contact
  • Mounting type
    DIN rail mounting
  • Operating voltage display
    Green LED
  • Connection method
    Screw connection
  • Conductor cross section solid
    0.2 mm² ... 2.5 mm²
  • Overvoltage category
    III
  • Designation
    Category (ISO 13849)
  • Identification
    ≤ 3
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 4.1
    27021100
  • ETIM 3.0
    EC001037
  • ETIM 6.0
    EC001037
  • UNSPSC 12.01
    39121514
  • UNSPSC 19.0
    25173902
  • Depth
    114 mm
  • Rated control supply current IS
    40 mA
  • Switching threshold
    9.6 V (“0” signal)
  • Rated operating voltage Ue
    500 V AC
  • Trigger characteristic in acc. with IEC 60947-4-2
    Class 10A
  • Mounting position
    vertical (horizontal DIN rail, motor output below)
  • Indication
    Red LED
  • Stripping length
    8 mm
  • Conductor cross section flexible
    0.2 mm² ... 2.5 mm²
  • Rated insulation voltage
    500 V
  • Degree of pollution
    2
  • Certificate
    NLDX.E228652
  • Category code
    NLDX / NRNT
  • ECLASS 11.0
    27370905
  • ECLASS 6.0
    27024000
  • ECLASS 5.1
    27024000
  • UNSPSC 7.0901
    39121514
  • UNSPSC 11
    39121514
  • Rated control circuit supply voltage US
    24 V DC
  • Input name
    Control input right/left
  • Switching level
    < 5 V DC (For EMERGENCY STOP)
  • Load current range
    75 mA ... 600 mA (see to derating)
  • Mains frequency
    50/60 Hz
  • Switching capacity according to IEC 60947-5-1
    3 A (230 V, AC15)
  • Assembly instructions
    alignable, for spacing see derating
  • Additional text
    Safe shutdown
  • FLA
    0.6 A (480 V AC)
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 4.0
    27021100
  • ECLASS 7.0
    27024002
  • ETIM 4.0
    EC001037
  • UNSPSC 6.01
    30211915
  • UNSPSC 13.2
    25173902
  • UNSPSC 18.0
    25173902
  • UNSPSC 21.0
    25173902

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging


1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Phoenix Contact

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Phoenix Contact Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo