2903149 Phoenix Contact AC/DC Power Supplies

Product Details

• Height
  130 mm
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Nominal input voltage range
  100 V AC ... 240 V AC
• Dielectric strength maximum
  300 V AC 15 s
• Width
  42 mm
• Degree of protection
  IP20
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Degree of pollution
  2
• Discharge current to PE
  < 3.5 mA
• Nominal power consumption
  285 VA
• Recommended breaker for input protection
  6 A ... 16 A (Characteristics B, C, D, K)
• Protective circuit/component
  Varistor
• Setting range of the output voltage (USet)
  24 V DC ... 28 V DC (constant capacity)
• Installation distance top/bottom
  50 mm / 50 mm
• Installation distance right/left
  0 mm / 0 mm
• Ambient temperature (start-up type tested)
  -25 °C
• Installation height
  ≤ 5000 m (> 2000 m, Derating: 10 %/1000 m)
• AC frequency range
  50 Hz ... 60 Hz ±10 %
• Current consumption
  3.1 A (100 V AC)
Power factor (cos phi)
0.93
Nominal output current (IN)
10 A
Feedback voltage resistance
≤ 35 V DC
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Efficiency
> 91 % (for 230 V AC and nominal values)
MTBF (IEC 61709, SN 29500)
> 1800000 h (25 °C)
Connection method
Push-in connection
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
1.5 mm²
EMC requirements for noise immunity
EN 61000-6-1
Standard - Safe isolation
DIN VDE 0100-410
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Rail applications
EN 50121-4
Discharge in air
8 kV (Test Level 4)
Electromagnetic HF field
EN 61000-4-3
Frequency range
0.15 MHz ... 80 MHz
Signal
1 kV (Test Level 2 - asymmetrical)
Criterion A
Normal operating behavior within the specified limits.
Surge voltage load (surge)
EN 61000-4-5
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 4.0
27040700
ECLASS 6.0
27049000
ECLASS 7.0
27049002
ETIM 6.0
EC002540
UNSPSC 18.0
39121004
Depth
160 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Climatic class
3K3 (in acc. with EN 60721)
Input voltage range
100 V AC ... 240 V AC -15 % ... +10 %
Mains buffering time
typ. 15 ms (120 V AC)
Type of protection
Transient surge protection
Derating
> 60 °C ... 70 °C (2.5%/K)
Connection in series
yes
Residual ripple
< 10 mVPP (with nominal values)
Net weight
1 kg
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible min.
0.2 mm²
Stripping length
8 mm
EMC requirements for noise emission
EN 61000-6-3
Standard - Electrical safety
IEC 60950-1/VDE 0805 (SELV)
UL approvals
UL Listed UL 508
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electrostatic discharge
EN 61000-4-2
Contact discharge
6 kV (Test Level 4)
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
Voltage
10 V (Test Level 3)
ECLASS 10.0.1
27040701
ECLASS 4.1
27040700
ECLASS 5.0
27049000
ETIM 4.0
EC002540
UNSPSC 13.2
39121004
UNSPSC 19.0
39121004
UNSPSC 21.0
39121004
Inrush current
≤ 25 A (typical)
Input fuse
6.3 A (internal (device protection))
Nominal output voltage
24 V DC ±1 %
Dynamic Boost (IDyn.Boost)
15 A (5 s)
Protection against overvoltage at the output (OVP)
≤ 30 V DC
Output power
240 W
Power loss nominal load max.
< 25 W
Maximum power dissipation in no-load condition
< 5.1 W (230 V)
Protection class
I (in closed control cabinet)
Conductor cross section solid max.
1.5 mm²
Conductor cross section AWG min.
24
Standard - Safety of transformers
EN 61558-2-16 (air clearances and creepage distances only)
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Test field strength
10 V/m (Test Level 3)
Comments
Criterion A
Input
3 kV (Test Level 3 - symmetrical)
Output
1 kV (Test Level 2 - symmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27040701
ECLASS 5.1
27049000
ECLASS 9.0
27040701
ETIM 7.0
EC002540
UNSPSC 20.0
39121004
Connection in parallel
Yes, for redundancy and increased capacity
Typical response time
< 1 s
Insulation voltage input/output
3 kV AC (type test)
Assembly instructions
alignable: horizontally 0 mm (≤ 40 °C) 10 mm (≤ 70 °C), vertically 50 mm
Conductor cross section AWG max.
16