2903154 Phoenix Contact AC/DC Power Supplies

Product Details

• Depth
  160 mm
• Degree of protection
  IP20
• Nominal input voltage range
  3x 400 V AC ... 500 V AC
• Discharge current to PE
  < 3.5 mA
• Input fuse
  3.15 A (internal (device protection), slow-blow)
• Protective circuit/component
  Varistor
• Derating
  > 60 °C ... 70 °C (2.5%/K)
• Connection in parallel
  Yes, for redundancy and increased capacity
• Power loss nominal load max.
  < 22 W (480 V AC)
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section flexible min.
  0.2 mm²
• Standard - Electrical safety
  IEC 60950-1/VDE 0805 (SELV)
• Standard – Limitation of mains harmonic currents
  EN 61000-3-2
• Electrostatic discharge
  EN 61000-4-2
• Frequency range
  0.15 MHz ... 80 MHz
• Surge voltage load (surge)
  EN 61000-4-5
• Criterion B
  Temporary impairment to operational behavior that is corrected by the device itself.
• ECLASS 10.0.1
  27040701
• ECLASS 6.0
  27049000
• ETIM 4.0
  EC002540
UNSPSC 19.0
39121004
Width
42 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Ambient temperature (start-up type tested)
-40 °C
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Nominal power consumption
451.7 VA
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Maximum power dissipation in no-load condition
< 1.1 W (400 V AC)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section solid max.
1.5 mm²
Conductor cross section AWG min.
24
Stripping length
8 mm
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Electromagnetic HF field
EN 61000-4-3
Contact discharge
6 kV (Test Level 4)
Signal
1 kV (Test Level 1 - symmetrical)
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 4.0
27040700
ECLASS 9.0
27040701
UNSPSC 18.0
39121004
UNSPSC 21.0
39121004
Installation distance top/bottom
50 mm / 50 mm
Climatic class
3K3 (in acc. with EN 60721)
Input voltage range
3x 400 V AC ... 500 V AC -20 % ....+15 %
Mains buffering time
typ. 10 ms (400 V AC)
Recommended breaker for input protection
6 A ... 16 A (Characteristics B, C, D, K)
Setting range of the output voltage (USet)
24 V DC ... 28 V DC (> 24 V DC, constant capacity restricted)
Connection in series
yes
Typical response time
< 1 s
Efficiency
> 92 % (at 400 V AC and nominal values)
Insulation voltage input/output
3 kV AC (type test)
Conductor cross section flexible max.
1.5 mm²
EMC requirements for noise immunity
EN 61000-6-1
Standard - Safe isolation
DIN VDE 0100-410
Conducted noise emission
EN 55016
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Input
3 kV (Test Level 3 - symmetrical)
Voltage
10 V (Test Level 3)
ECLASS 11.0
27040701
ECLASS 5.1
27049000
ETIM 6.0
EC002540
UNSPSC 13.2
39121004
UNSPSC 20.0
39121004
Height
130 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Degree of pollution
2
AC frequency range
50 Hz ... 60 Hz
Current consumption
3x 0.6 A (400 V AC)
Power factor (cos phi)
0.58
Type of protection
Transient surge protection
Dynamic Boost (IDyn.Boost)
15 A (5 s)
Nominal output current (IN)
10 A
Output power
240 W
Net weight
0.9 kg
Protection class
I (in closed control cabinet)
Assembly instructions
alignable: horizontally 0 mm (≤ 40 °C) 10 mm (≤ 70 °C), vertically 50 mm
Standard - Safety of transformers
EN 61558-2-16 (air clearances and creepage distances only)
Rail applications
EN 50121-4
UL approvals
UL Listed UL 508
Test field strength
10 V/m (Test Level 3)
Output
1 kV (Test Level 2 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 5.0
27049000
ECLASS 7.0
27049002
ETIM 7.0
EC002540
Installation distance right/left
0 mm / 0 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Installation height
≤ 5000 m (> 2000 m, Derating: 10 %/1000 m)
Inrush current
≤ 26 A (typical)
Nominal output voltage
24 V DC ±1 %
Protection against overvoltage at the output (OVP)
≤ 30 V DC
Residual ripple
≤ 20 mVPP
MTBF (IEC 61709, SN 29500)
> 2100000 h (25 °C)
Connection method
Push-in connection
Conductor cross section AWG max.
16
EMC requirements for noise emission
EN 61000-6-3
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Discharge in air
8 kV (Test Level 4)
Comments
Criterion A
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27040700