2903158 Phoenix Contact AC/DC Power Supplies

Product Details

• Width
  35 mm
• Installation distance right/left
  0 mm / 0 mm
• Degree of protection
  IP20
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Degree of pollution
  2
• Nominal input voltage range
  100 V AC ... 240 V AC
• Dielectric strength maximum
  ≤ 300 V AC 15 s
• Nominal power consumption
  254.7 VA
• Input fuse
  6.3 A Fast blow (internal (device protection))
• Type of protection
  Transient surge protection
• Nominal output voltage
  12 V DC ±1 %
• Connection in parallel
  Yes, for redundancy and increased capacity
• Protection against overvoltage at the output (OVP)
  ≤ 22 V DC
• Residual ripple
  < 50 mVPP (with nominal values)
• Height
  130 mm
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Ambient temperature (start-up type tested)
  -25 °C
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Input voltage range
  100 V AC ... 240 V AC -15 % ... +10 %
• Discharge current to PE
  < 0.25 mA
Inrush current
≤ 30 A (typical)
Recommended breaker for input protection
6 A ... 16 A (Characteristics B, C, D, K)
Protective circuit/component
Varistor
Setting range of the output voltage (USet)
12 V DC ... 18 V DC (> 12 V DC, constant capacity restricted)
Dynamic Boost (IDyn.Boost)
15 A (5 s)
Feedback voltage resistance
< 25 V
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Typical response time
< 1 s
Net weight
0.4 kg
Efficiency
typ. 87.5 % (120 V AC)
MTBF (IEC 61709, SN 29500)
> (25 °C)
Mounting position
horizontal DIN rail NS 35, EN 60715
Assembly instructions
alignable: horizontally 0 mm (≤ 40 °C) 10 mm (≤ 70 °C), vertically 50 mm
Connection method
Push-in connection
Conductor cross section flexible max.
1.5 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
16
Standard - Safety of transformers
EN 61558-2-16 (air clearances and creepage distances only)
Standard - Electrical safety
IEC 60950-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Rail applications
EN 50121-4
UL approvals
UL Listed UL 508
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Depth
115 mm
Installation distance top/bottom
50 mm / 50 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Climatic class
3K3 (in acc. with EN 60721)
Installation height
≤ 5000 m (> 2000 m, Derating: 10 %/1000 m)
AC frequency range
50 Hz ... 60 Hz ±10 %
Current consumption
2.2 A (100 V AC)
Mains buffering time
typ. 20 ms (120 V AC)
Power factor (cos phi)
0.53
Nominal output current (IN)
10 A
Derating
> 60 °C ... 70 °C (2.5%/K)
Connection in series
yes
Output power
120 W
Maximum power dissipation in no-load condition
< 1 W (230 V)
Power loss nominal load max.
< 15 W (230 V)
Insulation voltage input/output
3 kV AC (type test)
Protection class
II (in closed control cabinet)
Housing material
PC
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible min.
0.2 mm²
Stripping length
8 mm
EMC requirements for noise immunity
EN 61000-6-1
EMC requirements for noise emission
EN 61000-6-3
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Standard - Safe isolation
DIN VDE 0100-410
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Electrostatic discharge
EN 61000-4-2
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Contact discharge
6 kV (Test Level 3)
Test field strength
10 V/m (Test Level 3)
Comments
Criterion A
Fast transients (burst)
EN 61000-4-4
Surge voltage load (surge)
EN 61000-4-5
Conducted interference
EN 61000-4-6
Voltage
230 V AC
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 4.1
27040702
ECLASS 5.0
27049002
ECLASS 5.1
27049002
ETIM 4.0
EC002540
ETIM 6.0
EC002540
UNSPSC 13.2
39121004
UNSPSC 19.0
39121004
UNSPSC 20.0
39121004
Discharge in air
8 kV (Test Level 3)
Electromagnetic HF field
EN 61000-4-3
Frequency range
0.15 MHz ... 80 MHz
Input
3 kV (Test Level 4 - symmetrical)
Output
1 kV (Test Level 3 - symmetrical)
Signal
1 kV (Test Level 2 - asymmetrical)
Voltage dips
EN 61000-4-11
Frequency
50 Hz
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27040701
ECLASS 11.0
27040701
ECLASS 4.0
27040702
ECLASS 6.0
27049000
ECLASS 7.0
27049002
ECLASS 9.0
27040701
ETIM 7.0
EC002540
UNSPSC 18.0
39121004
UNSPSC 21.0
39121004