2903159 Phoenix Contact AC/DC Power Supplies

Product Details

• Installation distance right/left
  0 mm / 0 mm
• Climatic class
  3K3 (in acc. with EN 60721)
• Input voltage range
  100 V AC ... 240 V AC -15 % ... +10 %
• Mains buffering time
  typ. 15 ms (120 V AC)
• Nominal output voltage
  48 V DC ±1 %
• Dynamic Boost (IDyn.Boost)
  7.5 A (5 s)
• Feedback voltage resistance
  ≤ 60 V DC
• Connection in parallel
  Yes, for redundancy and increased capacity
• Short-circuit current
  < 7 A DC (Permanent)
• Efficiency
  typ. 90.5 % (120 V AC)
• Mounting position
  horizontal DIN rail NS 35, EN 60715
• Conductor cross section solid max.
  1.5 mm²
• Stripping length
  8 mm
• Standard - Safety of power supply units up to 1100 V (insulation distances)
  DIN EN 61558-2-16
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Degree of pollution
  2
• Criterion B
  Temporary impairment to operational behavior that is corrected by the device itself.
• ECLASS 4.0
  27040702
• Depth
  160 mm
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
Ambient temperature (start-up type tested)
-40 °C
Dielectric strength maximum
≤ 300 V AC 15 s
Discharge current to PE
< 3.5 mA
Nominal power consumption
285.7 VA
Nominal output current (IN)
5 A
Protection against overvoltage at the output (OVP)
≤ 60 V DC
Output power
240 W
Peak switching voltages nominal load
< 15 mVPP
Connection method
Push-in connection
Assembly instructions
alignable: horizontally 0 mm (≤ 40 °C) 10 mm (≤ 70 °C), vertically 50 mm
Conductor cross section AWG max.
16
EMC requirements for noise immunity
EN 61000-6-1
Rail applications
EN 50121-4
Conducted noise emission
EN 55016
Electromagnetic HF field
EN 61000-4-3
Fast transients (burst)
EN 61000-4-4
Signal
1 kV (Test Level 2 - asymmetrical)
I/O/S
asymmetrical
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27040701
ECLASS 5.0
27049002
ETIM 4.0
EC002540
UNSPSC 20.0
39121004
UNSPSC 21.0
39121004
Number of periods
1 period
Height
130 mm
Degree of protection
IP20
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Installation height
≤ 5000 m (> 2000 m, Derating: 10 %/1000 m)
Frequency range (fN)
50 Hz ... 60 Hz ±5 Hz
Recommended breaker for input protection
6 A ... 16 A (Characteristics B, C, D, K)
Setting range of the output voltage (USet)
36 V DC ... 55 V DC (> 48 V DC, constant capacity restricted)
Connection in series
yes
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Maximum power dissipation in no-load condition
typ. 4 W (120 V AC)
Power loss nominal load max.
typ. 24.5 W (120 V AC)
Insulation voltage input/output
3 kV AC (type test)
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Noise emission
EN 55016
Test field strength
10 V/m (Test Level 3)
Output
1 kV (Test Level 3 - symmetrical)
Frequency
50 Hz
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ECLASS 11.0
27040701
ECLASS 7.0
27049002
ETIM 7.0
EC002540
Width
42 mm
Installation distance top/bottom
50 mm / 50 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Nominal input voltage range
100 V AC ... 240 V AC
AC frequency range
50 Hz ... 60 Hz ±10 %
Current consumption
2.9 A (100 V AC)
Input fuse
6.3 A (internal (device protection))
Power factor (cos phi)
0.91
Derating
> 60 °C ... 70 °C (2.5%/K)
Residual ripple
< 20 mVPP (with nominal values)
Net weight
0.9 kg
MTBF (IEC 61709, SN 29500)
> 2000000 h (25 °C)
Protection class
I (in closed control cabinet)
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
1.5 mm²
Standard - Electrical safety
IEC 60950-1/VDE 0805 (SELV)
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Standard - Safe isolation
DIN VDE 0100-410
Contact discharge
6 kV (Test Level 4)
Discharge in air
8 kV (Test Level 4)
Comments
Criterion A
Surge voltage load (surge)
EN 61000-4-5
Voltage
230 V AC
Voltage dip
0 %
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27040702
ECLASS 9.0
27040701
UNSPSC 13.2
39121004
EMC requirements for noise emission
EN 61000-6-3
UL approvals
UL Listed UL 508
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electrostatic discharge
EN 61000-4-2
Frequency range
0.15 MHz ... 80 MHz
Input
2 kV (Test Level 4 - symmetrical)
Conducted interference
EN 61000-4-6
Voltage dips
EN 61000-4-11
Additional text
Test Level 2
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.1
27049002
ETIM 6.0
EC002540
UNSPSC 18.0
39121004
ECLASS 6.0
27049000
UNSPSC 19.0
39121004