2903160 Phoenix Contact AC/DC Power Supplies

Product Details

• Connection in parallel
  Yes, for redundancy and increased capacity
• Output power
  480 W
• Peak switching voltages nominal load
  < 1000 mVPP
• Mounting position
  horizontal DIN rail NS 35, EN 60715
• Conductor cross section solid max.
  1.5 mm²
• Stripping length
  8 mm
• Standard - Safety of transformers
  EN 61558-2-16 (air clearances and creepage distances only)
• Standard – Limitation of mains harmonic currents
  EN 61000-3-2
• Electrostatic discharge
  EN 61000-4-2
• Frequency range
  0.15 MHz ... 80 MHz
• Conducted interference
  EN 61000-4-6
• ECLASS 11.0
  27040701
• ECLASS 9.0
  27040701
• UNSPSC 20.0
  39121004
• Width
  68 mm
• Depth
  160 mm
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Ambient temperature (start-up type tested)
  -40 °C
• Climatic class
  3K3 (in acc. with EN 60721)
• Current consumption
  5.6 A (100 V AC)
Mains buffering time
typ. 10 ms (120 V AC)
Power factor (cos phi)
0.85
Nominal output current (IN)
10 A
Connection in series
yes
Typical response time
< 1 s
Installation distance top/bottom
50 mm / 50 mm
Degree of protection
IP20
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Dielectric strength maximum
≤ 300 V AC 15 s
Discharge current to PE
< 3.5 mA
Inrush current
20 A (at 25 °C)
Input fuse
10 A (internal (device protection))
Dynamic Boost (IDyn.Boost)
15 A (5 s)
Feedback voltage resistance
≤ 60 V DC
Maximum power dissipation in no-load condition
< 5.7 W (230 V)
Insulation voltage input/output
3 kV AC
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Contact discharge
6 kV (Test Level 4)
Test field strength
10 V/m (Test Level 3)
Surge voltage load (surge)
EN 61000-4-5
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27040701
ECLASS 4.1
27040702
ETIM 4.0
EC002540
ETIM 7.0
EC002540
UNSPSC 21.0
39121004
Height
130 mm
Installation distance right/left
0 mm / 0 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of pollution
2
Nominal input voltage range
100 V AC ... 240 V AC
Nominal power consumption
604.7 VA
Protective circuit/component
Varistor
Setting range of the output voltage (USet)
36 V DC ... 55 V DC (> 48 V DC, constant capacity restricted)
Derating
> 60 °C ... 70 °C (2.5%/K)
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Net weight
1.4 kg
Protection class
I (in closed control cabinet)
Connection method
Push-in connection
EMC requirements for noise immunity
EN 61000-6-1
Standard - Electrical safety
IEC 60950-1/VDE 0805 (SELV)
Rail applications
EN 50121-4
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Discharge in air
8 kV (Test Level 4)
Comments
Criterion A
Signal
1 kV (Test Level 2 - asymmetrical)
I/O/S
asymmetrical
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 5.1
27049002
ETIM 6.0
EC002540
UNSPSC 13.2
39121004
UNSPSC 19.0
39121004
Installation height
≤ 5000 m (> 2000 m, Derating: 10 %/1000 m)
Input voltage range
100 V AC ... 240 V AC -15 % ... +10 %
AC frequency range
50 Hz ... 60 Hz ±10 %
Recommended breaker for input protection
10 A ... 16 A (Characteristics B, C, D, K)
Type of protection
Transient surge protection
Nominal output voltage
48 V DC ±1 %
Protection against overvoltage at the output (OVP)
≤ 60 V DC
Residual ripple
< 50 mVPP (with nominal values)
Power loss nominal load max.
< 44 W
MTBF (IEC 61709, SN 29500)
> 1800000 h (25 °C)
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
16
EMC requirements for noise emission
EN 61000-6-3
Standard - Safe isolation
DIN VDE 0100-410
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Input
3 kV (Test Level 3 - symmetrical)
Voltage
10 V (Test Level 3)
ECLASS 5.0
27049002
ECLASS 7.0
27049002
Efficiency
> 93 % (for 230 V AC and nominal values)
Assembly instructions
alignable: horizontally 0 mm (≤ 40 °C) 10 mm (≤ 70 °C), vertically 50 mm
Conductor cross section flexible max.
1.5 mm²
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
UL approvals
UL Listed UL 508
Electromagnetic HF field
EN 61000-4-3
Fast transients (burst)
EN 61000-4-4
Output
1 kV (Test Level 2 - symmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 4.0
27040702
ECLASS 6.0
27049000
UNSPSC 18.0
39121004