2905908 Phoenix Contact UPS (DC)

Product Details

• Weight5.7 kg
• Width
  210 mm
• Installation distance top/bottom
  50 mm / 50 mm
• Ambient temperature (storage/transport)
  -15 °C ... 40 °C (with charged energy storage device)
• Vibration (operation)
  5 Hz ... 100 Hz, 0.7g (EN 60068-2-6)
• Rated Power (Real Power)
  600 W
• Form of output voltage
  Pure sine
• Degree of protection
  IP20
• Input fuse
  10 A 400 V gRL
• Capacity
  3.4 Ah
• Switching output
  Transistor output, active
• Low signal
  Connection to SGnd with < 2.7 kΩ
• UPS connection in series
  no
• Electrostatic discharge
  EN 61000-4-2
• Height
  170 mm
• Ambient temperature (operation)
  0 °C ... 40 °C
• Maximum altitude
  ≤ 3000 m (> 2000 m, observe derating)
• Degree of pollution
  3
• Input voltage range
  96 V AC ... 138 V AC
• Permissible backup fuse
  B10 B16 Listed breaker
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Crest factor
2.8
Nominal output current (IN)
6 A (750 VA)
Type of housing
DX51D+AZ (steel sheet / Galvalume)
Battery technology
Lead rechargeable battery module
Latest startup
6 Months (0 °C ... 20 °C)
Continuous load current
≤ 20 mA
High signal
Open (> 200 kΩ between bat. start and SGnd)
Depth
136 mm
Max. permissible relative humidity (operation)
≤ 95 % (25 °C, non-condensing)
Nominal input voltage
120 V AC
Current consumption
6 A
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
16
Power factor (cos phi)
0.8
Nominal output voltage (UN)
120 V AC
Protection class
I
Accumulator type
2x Panasonic UP-VW1220P1
Charging time
7 h
Output voltage
24 V (SELV)
Designation
Remote
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Contact discharge
6 kV (Test Level 3)
Input
1 kV (Test Level 2 - symmetrical)
Conducted interference
EN 61000-4-6
China RoHS
Environmentally Friendly Use Period = 3
ECLASS 11.0
27040705
ETIM 6.0
EC000382
UNSPSC 20.0
39121011
Installation distance right/left
0 mm / 0 mm
Shock
20g in all directions (EN 60068-2-27)
Climatic class
3K3 (in acc. with EN 60721)
Connection method
Push-in connection
Stripping length
8 mm
Apparent power
750 VA
Classification according to IEC 62040-3
VFD-SS-311
Frequency (after automatic detection in mains operation)
50 Hz
MTBF (IEC 61709, SN 29500)
> 206000 h (40 °C)
Hood version
PC + ABS
Battery fuse
40 A, 32 V
Buffer period
20 min. (100 W)
Can be extended with external battery
1x 24 V 3.4 Ah
Interface
MINI-USB type B
Standard uninterruptible power supply systems
EN 62040-1
Test field strength
100 A/m
Signal
1 kV (Test Level 2 - asymmetrical)
Power frequency magnetic field
EN 61000-4-8
REACh SVHC
Lead 7439-92-1
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 5.0
27040600
ETIM 7.0
EC000382
UNSPSC 21.0
39121011
Frequency range
0.15 MHz ... 80 MHz
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible max.
1.5 mm²
Switch-over time
< 10 ms
Efficiency
> 95 % (with charged energy storage device)
Service life
6 Years ... 9 Years (20 °C)
Status display
LED red
UPS connection in parallel
no
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic HF field
EN 61000-4-3
Output
1 kV (Test Level 2 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 4.1
27040600
ECLASS 6.0
27040600
UNSPSC 18.0
39121011
UL approvals
UL/C-UL Recognized UL 1778
Discharge in air
8 kV (Test Level 3)
Comments
Criterion A
Surge voltage load (surge)
EN 61000-4-5
Voltage
10 V
ECLASS 10.0.1
27040705
ECLASS 5.1
27040600
UNSPSC 13.2
39121011
Fast transients (burst)
EN 61000-4-4
Frequency
60 Hz
ECLASS 4.0
27040600
ECLASS 7.0
27040602
ECLASS 9.0
27040705
UNSPSC 19.0
39121011