2905909 Phoenix Contact UPS (DC)

Product Details

• Weight5.7 kg
• Ambient temperature (operation)
  0 °C ... 40 °C
• Degree of pollution
  2
• Climatic class
  3K3 (in acc. with EN 60721)
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section AWG min.
  24
• Power factor (cos phi)
  0.8
• Switch-over time
  < 10 ms
• Nominal output current (IN)
  3 A (750 VA)
• Frequency (after automatic detection in mains operation)
  50 Hz
• Hood version
  PC + ABS
• Input fuse
  10 A 400 V gRL
• Charging time
  7 h
• Depth
  136 mm
• Installation distance top/bottom
  50 mm / 50 mm
• Maximum altitude
  ≤ 3000 m (> 2000 m, observe derating)
• Installation distance right/left
  0 mm / 0 mm
• Vibration (operation)
  5 Hz ... 100 Hz, 0.7g (EN 60068-2-6)
• Frequency range
  0.15 MHz ... 80 MHz
• Permissible backup fuse
  B6 B10 B16
Conductor cross section flexible max.
1.5 mm²
Conductor cross section AWG max.
16
Nominal output voltage (UN)
230 V AC
MTBF (IEC 61709, SN 29500)
> 206000 h (40 °C)
Type of housing
DX51D+AZ (steel sheet / Galvalume)
Capacity
3.4 Ah
Accumulator type
2x Panasonic UP-VW1220P1
Latest startup
6 Months (0 °C ... 20 °C)
Buffer period
20 min. (100 W)
Switching output
Transistor output, active
High signal
Open (> 200 kΩ between bat. start and SGnd)
Interface
MINI-USB type B
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Electrostatic discharge
EN 61000-4-2
Comments
Criterion A
Output
1 kV (Test Level 2 - symmetrical)
Power frequency magnetic field
EN 61000-4-8
Voltage
10 V
Frequency
50 Hz
ECLASS 4.0
27040600
ECLASS 5.0
27040600
ECLASS 7.0
27040602
ECLASS 6.0
27040600
UNSPSC 20.0
39121011
Height
170 mm
Ambient temperature (storage/transport)
-15 °C ... 40 °C (with charged energy storage device)
Shock
20g in all directions (EN 60068-2-27)
Input voltage range
184 V AC ... 264 V AC
Connection method
Push-in connection
Conductor cross section flexible min.
0.2 mm²
Apparent power
750 VA
Rated Power (Real Power)
600 W
Form of output voltage
Pure sine
Efficiency
> 95 % (with charged energy storage device)
Degree of protection
IP20
Protection class
I
Battery technology
Lead rechargeable battery module
Service life
6 Years ... 9 Years (20 °C)
Can be extended with external battery
1x 24 V 3.4 Ah
Continuous load current
≤ 20 mA
Designation
Remote
UPS connection in series
no
UPS connection in parallel
no
Electromagnetic HF field
EN 61000-4-3
Discharge in air
8 kV (Test Level 3)
Test field strength
100 A/m
Surge voltage load (surge)
EN 61000-4-5
Criterion A
Normal operating behavior within the specified limits.
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 3
ECLASS 10.0.1
27040705
ECLASS 5.1
27040600
ETIM 7.0
EC000382
UNSPSC 19.0
39121011
UNSPSC 21.0
39121011
Width
210 mm
Max. permissible relative humidity (operation)
≤ 95 % (25 °C, non-condensing)
Nominal input voltage
230 V AC
Current consumption
3 A
Conductor cross section solid max.
1.5 mm²
Stripping length
8 mm
Crest factor
2.8
Classification according to IEC 62040-3
VFD-SS-311
Battery fuse
40 A, 32 V
Output voltage
24 V (SELV)
Status display
LED red
Low signal
Connection to SGnd with < 2.7 kΩ
Standard uninterruptible power supply systems
EN 62040-1
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Contact discharge
6 kV (Test Level 3)
Input
1 kV (Test Level 2 - symmetrical)
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
Signal
1 kV (Test Level 2 - asymmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 11.0
27040705
ECLASS 4.1
27040600
ECLASS 9.0
27040705
ETIM 6.0
EC000382
UNSPSC 18.0
39121011
UNSPSC 13.2
39121011