2907752 Phoenix Contact Redundancy Modules

Product Details

• Height with alternative assembly
  130 mm
• Depth with alternative assembly
  35 mm
• Degree of pollution
  2
• Current consumption
  40 A
• Static Boost (IStat.Boost)
  45 A
• Selective Fuse Breaking (ISFB)
  215 A (15 ms)
• Connection in series
  No
• Conductor cross section solid max.
  1.5 mm²
• EMC requirements for noise immunity
  EN 61000-6-1
• Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment
  EN 50178
• Additional text
  60 s
• Test field strength
  30 A/m
• Surge voltage load (surge)
  EN 61000-4-5
• REACh SVHC
  Lead 7439-92-1
• UNSPSC 13.2
  39121004
• Depth
  125 mm
• Installation distance top/bottom
  40 mm / 20 mm
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Ambient temperature (operation)
  -40 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Installation height
  ≤ 5000 m (> 2000 m, observe derating)
Dynamic Boost (IDyn.Boost)
60 A (5 s)
Efficiency
typ. 99.1 % (12 V DC)
Conductor cross section solid min.
0.2 mm²
Stripping length
8 mm
EMC requirements for noise emission
EN 61000-6-3
Width with alternative assembly
122 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input voltage range
8 V DC ... 30 V DC
Nominal output current (IN)
40 A
Net weight
0.55 kg
Mounting position
horizontal DIN rail NS 35, EN 60715
Connection method
Push-in connection
Conductor cross section AWG min.
24
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Noise emission
EN 55016
Electrostatic discharge
EN 61000-4-2
Comments
Criterion A
Fast transients (burst)
EN 61000-4-4
Power frequency magnetic field
EN 61000-4-8
Criterion A
Normal operating behavior within the specified limits.
ECLASS 9.0
27371010
Height
130 mm
Degree of protection
IP20
Climatic class
3K3 (in acc. with EN 60721)
Nominal input current
40 A (-40 °C ... 60 °C)
Derating
60 °C ... 70 °C (2.5%/K)
MTBF (IEC 61709, SN 29500)
> 25297000 h (25 °C)
Protection class
III
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
16
Screw thread
M4
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Shipbuilding approval
DNV GL
Conducted noise emission
EN 55016
DNV GL noise radiation
Class B
Contact discharge
8 kV (Test Level 4)
Discharge in air
15 kV (Test Level 4)
Output
1 kV (Test Level 2 - symmetrical)
I/O/S
asymmetrical
Conducted interference
EN 61000-4-6
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 10.0.1
27371010
ETIM 6.0
EC002540
Width
32 mm
Installation distance right/left
0 mm / 0 mm
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Nominal input voltage range
12 V DC ... 24 V DC
Output voltage range
8 V DC ... 30 V DC
Power loss nominal load max.
6.5 W (IOUT = 40 A)
Housing material
Aluminum / stainless steel
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Conductor cross section flexible max.
1.5 mm²
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Standard - Safe isolation
DIN VDE 0100-410
UL approvals
UL/C-UL listed UL 508
DNV GL conducted interference
Class A
Frequency range
0.15 MHz ... 80 MHz
Input
1 kV (Test Level 4 - symmetrical)
Voltage
10 V (Test Level 3)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 11.0
27371010
UNSPSC 19.0
39121004
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic HF field
EN 61000-4-3
Signal
1 kV (Test Level 2 - asymmetrical)
Frequency
16.67 Hz
ECLASS 5.1
27242213