2320173 Phoenix Contact Redundancy Modules

Product Details

• Width
  32 mm
• Installation distance right/left
  5 mm / 5 mm
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Installation height
  2000 m
• Nominal output voltage
  0.1 V (< DC input)
• Protection against overvoltage at the output (OVP)
  ≤ 32 V DC
• Mounting position
  horizontal DIN rail NS 35, EN 60715
• Connection method
  Screw connection
• Width with alternative assembly
  122 mm
• Degree of protection
  IP20
• Nominal input current
  2x 10 A (-25 °C ... 60 °C)
• Connection in series
  No
• Power loss nominal load max.
  2 W (IOUT = 20 A)
• MTBF (IEC 61709, SN 29500)
  > 1000000 h (40 °C)
• Conductor cross section solid max.
  4 mm²
• Contact discharge
  8 kV (Test Level 4)
• Height with alternative assembly
  130 mm
• Depth with alternative assembly
  35 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Max. permissible relative humidity (operation)
  ≤ 100 % (at 25 °C, non-condensing)
Derating
60 °C ... 70 °C (2.5%/K)
Net weight
0.4 kg
Depth
125 mm
Ambient temperature (start-up type tested)
-40 °C
Nominal input voltage range
24 V DC
Maximum input current
2x 15 A (-25°C ... 40°C)
Housing material
Steel sheet, zinc-plated
Conductor cross section flexible max.
2.5 mm²
Degree of pollution
2
Climatic class
3K3 (in acc. with EN 60721)
Stripping length
10 mm
EMC requirements for noise emission
EN 61000-6-3
Discharge in air
15 kV (Test Level 4)
UNSPSC 12.01
39121004
UNSPSC 21.0
32151504
Nominal output current (IN)
20 A (Increasing power)
EMC requirements for noise immunity
EN 61000-6-1
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Electrostatic discharge
EN 61000-4-2
UNSPSC 6.01
30211502
UNSPSC 18.0
32151504
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
16
Screw thread
M3
Electromagnetic HF field
EN 61000-4-3
UNSPSC 13.2
32151504
Height
130 mm
Installation distance top/bottom
50 mm / 50 mm
Input voltage range
18 V DC ... 28 V DC (SELV)
Efficiency
> 98 %
UNSPSC 7.0901
39121004
UNSPSC 19.0
32151504
Protection class
III
ECLASS 7.0
27371010
ETIM 4.0
EC000599
UNSPSC 11
39121004
UNSPSC 20.0
32151504
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Input
1 kV (Test Level 2 - symmetrical)
Output
1 kV (Test Level 2 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 5.1
27371000
ETIM 3.0
EC000599
Conductor cross section AWG max.
12
UL approvals
UL/C-UL listed UL 508
Test field strength
10 V/m (Test Level 3)
Surge voltage load (surge)
EN 61000-4-5
Voltage
10 V (Test Level 3)
ECLASS 11.0
27371010
ECLASS 5.0
27371000
Conductor cross section flexible min.
0.2 mm²
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Signal
1 kV (Test Level 2 - asymmetrical)
Conducted interference
EN 61000-4-6
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27250300
ECLASS 6.0
27371000
Frequency range
0.15 MHz ... 80 MHz
Comments
Criterion A
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Fast transients (burst)
EN 61000-4-4
I/O/S
asymmetrical
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 10.0.1
27371010
ECLASS 4.1
27250300
ECLASS 9.0
27371010
ETIM 7.0
EC000683
ETIM 6.0
EC000683