2909575 Phoenix Contact AC/DC Power Supplies

Product Details

• Height
  106 mm
• Degree of protection
  IP20
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Current consumption
  0.46 A (100 V AC)
• Input fuse
  3.15 A (slow-blow, internal)
• Connection in series
  yes
• Output power
  30 W
• Environmental protection directive
  RoHS Directive 2011/65/EU
• Efficiency
  typ. 89.2 % (120 V AC)
• Assembly instructions
  DIN rail mounting
• Standard - Electrical safety
  IEC 61010-2-201 (SELV)
• EMC requirements for noise emission
  EN 61000-6-3
• Standard – Safety extra-low voltage
  IEC 61010-1 (SELV)
• Contact discharge
  8 kV (Test Level 4)
• Flicker
  EN 61000-3-3
• Electromagnetic HF field
  EN 61000-4-3
• Conducted interference
  EN 61000-4-6
• Additional text
  Test Level 2
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Input voltage range
  100 V AC ... 240 V AC -15 % ... +10 %
Inrush current
typ. 5.9 A (at 25 °C)
Type of protection
Transient surge protection
Static Boost (IStat.Boost)
1.625 A (≤ 40 °C)
Feedback voltage resistance
≤ 35 V DC
Control deviation
< 0.5 % (Static load change 10 % ... 90 %)
MTBF (IEC 61709, SN 29500)
> 1904000 h (25 °C)
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Standard - Safety of transformers
EN 61558-2-16
Conducted noise emission
EN 55016
Electrostatic discharge
EN 61000-4-2
Output
1 kV (Test Level 3 - symmetrical)
Signal
0.5 kV (Test Level 2 - symmetrical)
Frequency
60 Hz
Number of periods
0.5 / 1 / 5 / 50 periods
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 7.0
27049002
Depth
90 mm
Degree of pollution
2
Installation height
≤ 5000 m (> 2000 m, observe derating)
Protective circuit/component
Varistor
Dynamic Boost (IDyn.Boost)
2.6 A (≤ 60 °C (5 s))
Connection in parallel
Yes, for redundancy and increased capacity
Residual ripple
< 40 mVPP (with nominal values)
Net weight
0.188 kg
Insulation voltage input/output
4 kV AC (type test)
Conductor cross section flexible max.
2.5 mm²
Stripping length
10 mm
Standard - safety for equipment for measurement, control, and laboratory use
IEC 61010-1
Standard – Limitation of mains harmonic currents
EN 61000-3-2
SIQ
CB-Scheme (IEC 61010-1, IEC 61010-2-201)
Harmonic currents
EN 61000-3-2
Frequency range
50 Hz ... 60 Hz
Comments
Criterion A
Surge voltage load (surge)
EN 61000-4-5
Voltage dips
EN 61000-4-11
Pulse-shape magnetic field
EN 61000-4-9
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
Width
22.5 mm
Installation distance top/bottom
30 mm / 30 mm
Ambient temperature (start-up type tested)
-40 °C
Climatic class
3K3 (in acc. with EN 60721)
Frequency range (fN)
50 Hz ... 60 Hz -10 % ... +10 %
Nominal power consumption
37 VA
Nominal output voltage
24 V DC
Setting range of the output voltage (USet)
24 V DC ... 28 V DC (constant capacity)
Typical response time
500 ms
Power loss nominal load max.
< 3.7 W (120 V AC)
Protection class
II
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG max.
14
Standard - Safe isolation
IEC 61558-2-16
UL approvals
UL Listed UL 61010-1
Noise emission
EN 55016
Discharge in air
8 kV (Test Level 3)
Fast transients (burst)
EN 61000-4-4
I/O/S
asymmetrical
Power frequency magnetic field
EN 61000-4-8
Test level 2
16.67 Hz 50 Hz 60 Hz (Test Level 4)
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27242213
ETIM 7.0
EC002540
UNSPSC 21.0
39121004
Installation distance right/left
0 mm / 0 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Dielectric strength maximum
300 V AC 30 s
Discharge current to PE
< 0.25 mA (264 V AC, 60 Hz)
Mains buffering time
typ. 43 ms (120 V AC)
Nominal output current (IN)
1.3 A
Derating
> 60 °C (2.5%/K)
Protection against overvoltage at the output (OVP)
≤ 32 V DC
Maximum power dissipation in no-load condition
< 0.4 W (230 V AC)
Connection method
Push-in connection
Conductor cross section flexible min.
0.2 mm²
EMC requirements for noise immunity
EN 61000-6-1
Standard - power supply devices for low voltage with DC output
EN 61204-3
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Test field strength
1000 A/m
Input
2 kV (symmetrical)
Voltage
300 V (1 s)
Voltage dip
0 %
Test level 1
16.67 Hz 50 Hz 60 Hz (Test Level 2)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 11.0
27040701
ECLASS 6.0
27049000
UNSPSC 20.0
39121004
Asymmetrical conducted disturbance variables
EN 61000-4-16
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 10.0.1
27040701
ETIM 6.0
EC002540
UNSPSC 18.0
39121004
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ECLASS 9.0
27040701
UNSPSC 19.0
39121004
UNSPSC 13.2
39121004