2909576 Phoenix Contact AC/DC Power Supplies

Product Details

• Height
  106 mm
• Degree of protection
  IP20
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Dielectric strength maximum
  300 V AC 30 s
• Input fuse
  3.15 A (slow-blow, internal)
• Static Boost (IStat.Boost)
  3.125 A (≤ 40 °C)
• Connection in parallel
  Yes, for redundancy and increased capacity
• Residual ripple
  < 40 mVPP (with nominal values)
• Power loss nominal load max.
  < 5 W (230 V AC)
• Connection method
  Push-in connection
• Conductor cross section flexible max.
  2.5 mm²
• Standard - Electrical safety
  IEC 61010-2-201 (SELV)
• Standard - power supply devices for low voltage with DC output
  EN 61204-3
• UL approvals
  UL Listed UL 61010-1
• Conducted noise emission
  EN 55016
• Contact discharge
  8 kV (Test Level 4)
• Conducted interference
  EN 61000-4-6
• Voltage dips
  EN 61000-4-11
• Test level 2
  16.67 Hz 50 Hz 60 Hz (Test Level 4)
• Criterion C
  Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ETIM 7.0
EC002540
UNSPSC 19.0
39121004
Installation distance right/left
0 mm / 0 mm
Ambient temperature (start-up type tested)
-40 °C
Installation height
≤ 5000 m (> 2000 m, observe derating)
Nominal power consumption
71 VA
Type of protection
Transient surge protection
Dynamic Boost (IDyn.Boost)
5 A (≤60 °C (5 s), Input <150 V AC Derating 0.5 %/V)
Feedback voltage resistance
≤ 35 V DC
Output power
60 W
Environmental protection directive
RoHS Directive 2011/65/EU
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG max.
14
Standard – Safety extra-low voltage
IEC 61010-1 (SELV)
SIQ
CB-Scheme (IEC 61010-1, IEC 61010-2-201)
Electrostatic discharge
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Signal
2 kV (Test Level 4 - symmetrical)
I/O/S
asymmetrical
Pulse-shape magnetic field
EN 61000-4-9
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 11.0
27040701
ECLASS 7.0
27049002
UNSPSC 13.2
39121004
Depth
90 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Frequency range (fN)
50 Hz ... 60 Hz -10 % ... +10 %
Inrush current
typ. 10 A (at 25 °C)
Nominal output current (IN)
2.5 A
Derating
> 60 °C (2.5%/K)
Typical response time
500 ms
Assembly instructions
DIN rail mounting
Conductor cross section flexible min.
0.2 mm²
Stripping length
10 mm
EMC requirements for noise emission
EN 61000-6-3
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Frequency range
0.15 MHz ... 80 MHz
Fast transients (burst)
EN 61000-4-4
Output
1 kV (Test Level 3 - symmetrical)
Frequency
60 Hz
Power frequency magnetic field
EN 61000-4-8
Number of periods
0.5 / 1 / 5 / 50 periods
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27242213
UNSPSC 18.0
39121004
Width
32 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Climatic class
3K3 (in acc. with EN 60721)
Discharge current to PE
< 0.25 mA (264 V AC, 60 Hz)
Mains buffering time
typ. 54 ms (120 V AC)
Protective circuit/component
Varistor
Connection in series
yes
Protection against overvoltage at the output (OVP)
≤ 32 V DC
Efficiency
typ. 91.9 % (120 V AC)
Protection class
II
Conductor cross section solid min.
0.2 mm²
Standard - Safety of transformers
EN 61558-2-16
EMC requirements for noise immunity
EN 61000-6-1
Standard - safety for equipment for measurement, control, and laboratory use
IEC 61010-1
Noise emission
EN 55016
Test field strength
1000 A/m
Comments
Criterion B
Additional text
Test Level 2
Asymmetrical conducted disturbance variables
EN 61000-4-16
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 10.0.1
27040701
ETIM 6.0
EC002540
UNSPSC 21.0
39121004
Installation distance top/bottom
30 mm / 30 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Degree of pollution
2
Input voltage range
100 V AC ... 240 V AC -15 % ... +10 %
Current consumption
0.85 A (100 V AC)
Setting range of the output voltage (USet)
24 V DC ... 28 V DC (constant capacity)
Nominal output voltage
24 V DC
Control deviation
< 0.5 % (Static load change 10 % ... 90 %)
Maximum power dissipation in no-load condition
< 1 W (230 V AC)
MTBF (IEC 61709, SN 29500)
> 1347000 h (25 °C)
Net weight
0.244 kg
Insulation voltage input/output
4 kV AC (type test)
Conductor cross section AWG min.
24
Standard - Safe isolation
IEC 61558-2-16
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Discharge in air
8 kV (Test Level 3)
Input
2 kV (symmetrical)
Surge voltage load (surge)
EN 61000-4-5
Voltage
300 V (1 s)
Voltage dip
0 %
Test level 1
16.67 Hz 50 Hz 60 Hz (Test Level 3)
Criterion A
Normal operating behavior within the specified limits.
Attenuated oscillating wave
EN 61000-4-18
ECLASS 6.0
27049000
ECLASS 9.0
27040701
UNSPSC 20.0
39121004