2963763 Phoenix Contact Electrical Safety Devices
Part#:2963763
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 181
Dec 22, 2024
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, single or two-channel operation, 3 enabling current paths, nominal input voltage of 24 V AC/DC, plug-in screw terminal blocks
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2963763 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Depth 114.5 mm
- Nominal input voltage UN 24 V AC/DC
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Operating voltage display Green LED
- Minimum switching voltage 15 V AC/DC
- Inrush current, minimum 25 mA
- Interrupting rating (ohmic load) max. 144 W (24 V DC, τ = 0 ms)
- Net weight 200.7 g
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -20 °C ... 55 °C
- Input voltage range in reference to UN 0.85 ... 1.1
- Typical release time 45 ms (single-channel)
- Status display Green LED
- Maximum switching voltage 250 V AC/DC
- Maximum inrush current 6 A
- Switching capacity min. 0.4 W
- Switching capacity (360/h cycles) 6 A (24 V DC)
- Mounting position any
- Housing color yellow
- Stop category 0
- Category 4
- Overvoltage category III
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 40020600
- ETIM 3.0 EC001449
- UNSPSC 12.01 39121501
- UNSPSC 13.2 39121501
- Width 22.5 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Typical input current at UN 140 mA AC
- Typical response time 100 ms (automatic start)
- Max. permissible overall conductor resistance approx. 50 Ω (Input and start circuits at UN)
- Contact type 3 enabling current paths
- Maximum interrupting rating (inductive load) 48 W (24 V DC, τ = 40 ms)
- Nominal operating mode 100% operating factor
- Degree of protection IP20
- Conductor cross-section AWG 24 ... 12
- Performance level (PL) e
- Rated surge voltage/insulation 4 kV / basic insulation (safe isolation, reinforced insulation, and 6 kV between A1-A2/logic/enabling and signaling current paths)
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.1 27371900
- ETIM 2.0 EC000196
- UNSPSC 6.01 30211901
- UNSPSC 7.0901 39121501
- Voltage at input/start and feedback circuit approx. 24 V DC
- Concurrence ∞
- Contact material AgSnO2, + 0.2 µm Au
- Sq. Total current 72 A2 (ITH2 = I12 + I22 + I32)
- Mechanical service life approx. 107 cycles
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Connection method Screw connection
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Stripping length 7 mm
- Safety Integrity Level (SIL) 3
- Shock 15g
- ECLASS 11.0 27371819
- ECLASS 5.0 27371900
- ECLASS 6.0 27371800
- ETIM 4.0 EC001449
- ETIM 7.0 EC001449
- UNSPSC 19.0 39122205
- UNSPSC 21.0 39122205
- Height 99 mm
- Ambient temperature (storage/transport) -40 °C ... 70 °C
- Maximum altitude ≤ 2000 m (Above sea level)
- Recovery time 1 s
- Protective circuit Surge protection Suppressor diode
- Limiting continuous current 6 A (N/O contact)
- Output fuse 10 A gL/gG NEOZED (N/O contact)
- Mounting type DIN rail mounting
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Designation Air clearances and creepage distances between the power circuits
- Safety Integrity Level Claim Limit (SIL CL) 3
- Standards/regulations DIN EN 50178/VDE 0160
- ECLASS 4.1 40020600
- ECLASS 9.0 27371819
- ETIM 6.0 EC001449
- UNSPSC 11 39121501
- UNSPSC 20.0 39122205
- UNSPSC 18.0 39122205
- Min. degree of protection of inst. location IP54
- pluggable Yes
- Screw thread M3
- Rated insulation voltage 250 V
- Degree of pollution 2
- ECLASS 10.0.1 27371819
- ECLASS 7.0 27371819
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$272.37
Stock:
181
Select Qty:
$272.37
$272.37 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
