2963970 Phoenix Contact Electrical Safety Devices
Part#:2963970
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 78
Dec 22, 2024
Safe coupling relay with force-guided contacts, 5 N/O contacts, 2 N/C contacts, 1-channel, width: 22.5 mm, pluggable Push-in terminal block
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2963970 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Width 22.5 mm
- Ambient temperature (operation) -20 °C ... 55 °C
- Rated control circuit supply voltage US 24 V AC/DC -15 % / +10 %
- Inrush current typ. 350 mA DC (Δt < 1 µs at Us)
- Operating voltage display 1 x green LED
- Performance level (PL) c
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Power consumption at US typ. 1.2 W
- Sq. Total current 72 A2
- Mechanical service life 10x 106 cycles
- Nominal operating mode 100% operating factor
- Housing color yellow
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Torque 0.6 Nm
- Conformance CE-compliant
- ECLASS 9.0 27371601
- ETIM 3.0 EC001449
- UNSPSC 7.0901 39121501
- UNSPSC 13.2 39121501
- Height 114.5 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Rated control supply current IS typ. 47 mA
- Typ. starting time with Us typ. 20 ms (when controlled via A1)
- Protective circuit Surge protection Varistor
- Maximum switching voltage 230 V AC/DC (Observe the load curve)
- Inrush current, minimum 10 mA
- Switching capacity according to IEC 60947-5-1 3 A (24 V (DC13))
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Min. degree of protection of inst. location IP54
- Connection method Push-in connection
- Stripping length 8 mm
- Rated insulation voltage 250 V
- ECLASS 4.0 27371100
- ECLASS 6.0 27371600
- ETIM 2.0 EC000196
- ETIM 7.0 EC001437
- UNSPSC 11 39121501
- UNSPSC 20.0 39122334
- Depth 112 mm
- Maximum altitude max. 2000 m (Above sea level)
- Recovery time < 500 ms
- Contact type 5 enabling current paths
- Maximum inrush current 6 A
- Switching capacity min. 50 mW
- Maximum interrupting rating (inductive load) 42 W (N/O contact, 24 V DC, τ = 40 ms)
- Degree of protection IP20
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Stop category 0
- Safety Integrity Level Claim Limit (SIL CL) 1
- Shock 15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.)
- ECLASS 11.0 27371819
- ECLASS 5.1 27371600
- ECLASS 5.0 27371600
- ETIM 6.0 EC001437
- UNSPSC 12.01 39121501
- UNSPSC 19.0 39122334
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Input voltage range 20.4 V AC/DC ... 26.4 V AC/DC
- Typical release time typ. 20 ms (when controlled via A1)
- Maximum switching frequency 0.5 Hz
- Minimum switching voltage 5 V AC/DC
- Limiting continuous current 6 A (N/O contact)
- Output fuse 10 A gL/gG (N/O contact)
- Mounting position any
- Housing material PBT
- Conductor cross-section AWG 24 ... 16
- Designation Air clearances and creepage distances between the power circuits
- Category 1
- Rated surge voltage/insulation Safe isolation 4 kV between all current paths and housing
- Degree of pollution 2
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.1 27371100
- Contact material AgSnO2
- Interrupting rating (ohmic load) max. 144 W (N/O contact, 24 V DC, τ = 0 ms)
- Switching capacity (360/h cycles) 4 A (24 V (DC13))
- Net weight 148 g
- Mounting type DIN rail mounting
- pluggable Yes
- Safety Integrity Level (SIL) 1
- Standards/regulations DIN EN 50178
- Overvoltage category II
- Vibration (operation) 10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.)
- ECLASS 10.0.1 27371601
- ECLASS 7.0 27371601
- ETIM 4.0 EC001449
- UNSPSC 6.01 30211901
- UNSPSC 18.0 39122334
- UNSPSC 21.0 39122334
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$202.72
Stock:
78
Select Qty:
$202.72
$202.72 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
