2981431 Phoenix Contact Electrical Safety Devices
Part#:2981431
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 14
Dec 22, 2024
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e (EN ISO 13849), one- or two-channel operation, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with dropout delay of 0.2 s ... 300 s, plug
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2981431 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Height 112 mm
- Power consumption at US typ. 3.72 W
- Voltage at input/start and feedback circuit 24 V DC -15 % / +10 %
- Recovery time < 1 s
- Maximum switching frequency 0.5 Hz
- Maximum switching voltage 250 V AC/DC (Observe the load curve)
- Sq. Total current 55 A2 (observe derating)
- Nominal operating mode 100% operating factor
- Mounting type DIN rail mounting
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Stop category 0
- Safety Integrity Level Claim Limit (SIL CL) 3 (for delayed contacts SILCL 2)
- Degree of pollution 2
- ECLASS 11.0 27371819
- ECLASS 5.1 27371900
- ETIM 6.0 EC001449
- UNSPSC 11 39121501
- UNSPSC 13.2 39121501
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (storage/transport) -40 °C ... 70 °C
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Inrush current 200 mA (at US)
- Typical release time < 20 ms (when controlled via S11/S12 and S21/S22)
- Filter time 1 ms (at A1 in the event of voltage dips at Us)
- Limiting continuous current 6 A (N/O contact, pay attention to the derating)
- Maximum interrupting rating (inductive load) 42 W (24 V DC, τ = 40 ms, delayed contacts: 48 W)
- Switching capacity min. 50 mW
- Net weight 336.53 g
- Min. degree of protection of inst. location IP54
- pluggable Yes
- Conductor cross-section AWG 24 ... 16
- Safety Integrity Level (SIL) 3 (for delayed contacts SIL 2)
- Rated insulation voltage 250 V AC
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 10.0.1 27371819
- ECLASS 5.0 27371900
- ETIM 4.0 EC001449
- UNSPSC 12.01 39121501
- UNSPSC 19.0 39122205
- Ambient temperature (operation) -20 °C ... 55 °C (observe derating)
- Rated control circuit supply voltage US 24 V DC -15 % / +10 %
- Concurrence ∞
- Status display 4 x green LEDs
- Contact type 5 enabling current paths
- Interrupting rating (ohmic load) max. 144 W (24 V DC, τ = 0 ms)
- Output fuse 10 A gL/gG (N/O contact)
- Mounting position any
- Housing color yellow
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Designation Air clearances and creepage distances between the power circuits
- Standards/regulations DIN EN 50178/VDE 0160
- Shock 15g
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 40020600
- ECLASS 9.0 27371819
- ETIM 2.0 EC001449
- ETIM 7.0 EC001449
- UNSPSC 21.0 39122205
- Depth 114.5 mm
- Maximum altitude ≤ 2000 m (Above sea level)
- Rated control supply current IS typ. 155 mA
- Typical response time < 600 ms (automatic start)
- Operating voltage display 1 x green LED
- Max. permissible overall conductor resistance approx. 22 Ω (Input and start circuits at US)
- Minimum switching voltage 5 V AC/DC
- Inrush current, minimum 10 mA
- Mechanical service life 10x 106 cycles
- Degree of protection IP20
- Connection method Push-in connection
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Category 4 (Undelayed contacts)
- Rated surge voltage/insulation Basic insulation 4 kV:between all current paths and housingSafe isolation, reinforced insulation 6 kV:between 13/14, 23/24, 33/34, and the remaining current pathsbetween 13/14, 23/24, 33/34 among one another
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 7.0 27371819
- ECLASS 6.0 27371800
- UNSPSC 6.01 30211901
- UNSPSC 20.0 39122205
- Width 45 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Current consumption < 40 mA (with Us/Ix to S10)
- Typ. starting time with Us < 600 ms (when controlled via A1)
- Protective circuit Surge protection Suppressor diode
- Contact material AgSnO2
- Maximum inrush current 20 A (Δt 100 ms, undelayed contacts)
- Switching capacity (360/h cycles) 4 A (24 V DC)
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Housing material PBT
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Stripping length 8 mm
- Performance level (PL) e (for delayed contacts PL d)
- Overvoltage category III
- Conformance CE-compliant
- ECLASS 4.1 40020600
- ETIM 3.0 EC001449
- UNSPSC 7.0901 39121501
- UNSPSC 18.0 39122205
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$640.16
Stock:
14
Select Qty:
$640.16
$640.16 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
