2981965 Phoenix Contact Electrical Safety Devices

Product Details

• Depth
  112 mm
• Rated control circuit supply voltage US
  24 V AC/DC -15 % / +10 %
• Operating voltage display
  1 x green LED
• Contact material
  AgSnO2
• Inrush current, minimum
  10 mA
• Mechanical service life
  10x 106 cycles
• Relay type
  Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
• Housing material
  PBT
• pluggable
  Yes
• Conductor cross-section flexible with ferrule without plastic sleeve
  0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
• Safety Integrity Level (SIL)
  1
• Width
  22.5 mm
• Ambient temperature (operation)
  -20 °C ... 55 °C
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Input voltage range
  20.4 V AC/DC ... 26.4 V AC/DC
• Protective circuit
  Surge protection Varistor
• Maximum switching voltage
  230 V AC/DC (Observe the load curve)
• Limiting continuous current
  6 A (N/O contact)
• Overvoltage category
  III
• Height
  114.5 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Inrush current
typ. 350 mA DC (Δt < 1 µs at Us)
Maximum switching frequency
0.5 Hz
Sq. Total current
72 A2
Switching capacity (360/h cycles)
4 A (24 V (DC13))
Mounting position
vertical or horizontal
Housing color
yellow
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Designation
Air clearances and creepage distances between the power circuits
Performance level (PL)
c
Standards/regulations
DIN EN 50178
ECLASS 5.0
27371600
ETIM 2.0
EC001449
UNSPSC 7.0901
39121501
UNSPSC 20.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Power consumption at US
typ. 1.2 W
Typical release time
typ. 20 ms (when controlled via A1)
Maximum inrush current
6 A
Maximum interrupting rating (inductive load)
42 W (N/O contact, 24 V DC, τ = 40 ms)
Nominal operating mode
100% operating factor
Net weight
140 g
Min. degree of protection of inst. location
IP54
Conductor cross-section AWG
24 ... 16
Category
1
Rated insulation voltage
250 V
Conformance
CE-compliant
ECLASS 11.0
27371819
ECLASS 7.0
27371601
UNSPSC 6.01
30211901
UNSPSC 11
39121501
Maximum altitude
max. 2000 m (Above sea level)
Rated control supply current IS
typ. 47 mA
Typ. starting time with Us
typ. 20 ms (when controlled via A1)
Recovery time
< 500 ms
Contact type
5 enabling current paths
Minimum switching voltage
5 V AC/DC
Interrupting rating (ohmic load) max.
144 W (N/O contact, 24 V DC, τ = 0 ms)
Output fuse
10 A gL/gG (N/O contact)
Mounting type
DIN rail mounting
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Stripping length
8 mm
Stop category
0
Safety Integrity Level Claim Limit (SIL CL)
1
Vibration (operation)
10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.)
Shock
15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.)
ECLASS 4.1
27371100
ETIM 6.0
EC001437
UNSPSC 13.2
39121501
Switching capacity
min. 50 mW
Switching capacity according to IEC 60947-5-1
3 A (24 V (DC13))
Degree of protection
IP20
Connection method
Push-in connection
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Torque
0.6 Nm
Rated surge voltage/insulation
4 kV / basic isolation (safe isolation, reinforced isolation and 6 kV between A1/A2, 53/54, 71/72 and 13/14, 23/24, 33/34, 43/44.)
ECLASS 10.0.1
27371601
ECLASS 6.0
27371600
ECLASS 5.1
27371600
ETIM 3.0
EC001449
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334
Degree of pollution
2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27371100
ECLASS 9.0
27371601
ETIM 4.0
EC001449
ETIM 7.0
EC001437
UNSPSC 12.01
39121501
UNSPSC 19.0
39122334