3002612 Phoenix Contact Terminal Blocks

Product Details

• UNSPSC 19.0
  39121410
• UNSPSC 21.0
  39121410
• UNSPSC 13.2
  39121410
• Nominal cross section
  4 mm²
• Degree of pollution
  3
• Maximum power dissipation
  max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
• Connection in acc. with standard
  IEC 60947-7-3
• Fuse type
  Glass / ceramics / ...
• Back of the hand protection
  guaranteed
• Note
  Swing the locking lever to its final position before replacing the fuse.
• Maximum power dissipation for nominal condition
  1.6 W (the value is multiplied when connecting multiple levels)
• Overvoltage category
  III
• Insulating material group
  I
• Maximum load current (upper level)
  6.3 A (the current is determined by the fuse used)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Surge voltage test setpoint
  4 kV
• Contact resistance
  Test passed
• Bending test rotation speed
  10 rpm
• Testing the rated value of the power dissipation (exclusively short circuit protection)
  Test passed
• Number of connections
  4
Flammability rating according to UL 94
V0
Rated operating voltage
250 V
Nominal voltage UN
250 V (the voltage is determined by the light indicator.)
Nominal current IN (upper level)
6.3 A
Finger protection
guaranteed
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
83.9 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 6.0
27141100
UNSPSC 20.0
39121410
Number of levels
3
Insulating material
PA
LED current range
0.41 mA ... 0.96 mA
Nominal current IN
28 A
Fuse
G / 5 x 20
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Temperature cycles
192
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
6.2 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
ECLASS 11.0
27141116
ECLASS 4.1
27141100
ETIM 4.0
EC000899
ETIM 7.0
EC000899
Color
black
Rated surge voltage
6 kV
LED voltage range
110 V AC/DC ... 250 V AC/DC
Maximum load current
32 A (with 6 mm² conductor cross section, rigid)
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of temperature-rise test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
0.964 (m/s2)2/Hz
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/15
91.4 mm
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section solid max.
6 mm²
Conductor cross section AWG max.
10
Connection method
Push-in connection
ECLASS 10.0.1
27141116
ECLASS 5.1
27141100
ECLASS 9.0
27141116
Power frequency withstand voltage setpoint
1.5 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of aging test
Test passed
Acceleration
5g
Shock duration
30 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
118.5 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
Conductor cross section AWG min.
24
Internal cylindrical gage
A4
ECLASS 4.0
27141100
UNSPSC 18.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
82.6 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Stripping length
10 mm ... 12 mm
ECLASS 7.0
27141116
ETIM 6.0
EC000899