3004388 Phoenix Contact Terminal Blocks

Product Details

• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.25 mm²
• ETIM 3.0
  EC000897
• ETIM 4.0
  EC000897
• ECLASS 7.0
  27141120
• UNSPSC 11
  39121410
• UNSPSC 20.0
  39121410
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height NS 35/15
  54.5 mm
• Stripping length
  8 mm
• Conductor cross section AWG max.
  10
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• 2 conductors with same cross section, solid max.
  1.5 mm²
• Internal cylindrical gage
  A4
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141100
• Number of levels
  1
• Nominal cross section
  4 mm²
• Insulating material group
  I
• Degree of pollution
  3
Maximum power dissipation for nominal condition
1.02 W
Shock protection test specification
IEC 60529:2001-02
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 32/NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
1.8 mm
Length
42.5 mm
Screw thread
M3
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
ECLASS 6.0
27141100
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Number of connections
2
Flammability rating according to UL 94
V0
Color
blue
Overvoltage category
III
Nominal current IN
32 A
Power frequency withstand voltage setpoint
2 kV
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Setpoint
5 N
Short circuit stability result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
6.2 mm
Connection method
Screw connection
Conductor cross section AWG min.
24
Connection in acc. with standard
CSA
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Rated surge voltage
8 kV
Open side panel
Yes
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 32
52 mm
Tightening torque, min
0.6 Nm
Conductor cross section solid max.
6 mm²
UNSPSC 21.0
39121410
Nominal voltage UN
800 V
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
4 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
47 mm
Potentials
1
Bending test turns
135
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Insulating material
PA
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Maximum load current
41 A (with 6 mm² conductor cross section)
Max. AWG conductor cross section, flexible
12
Cross section with insertion bridge, stranded max.
4 mm²
ECLASS 11.0
27141120
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
ECLASS 5.1
27141100
ETIM 2.0
EC000897
UNSPSC 13.2
39121410
Tightening torque max
0.8 Nm
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 9.0
27141120
UNSPSC 18.0
39121410
Min. AWG conductor cross section, flexible
24
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27141100
ETIM 6.0
EC000897
UNSPSC 6.01
30211811