3025273 Phoenix Contact Electrical Circuit Protection & Load Centers

Product Details

• Nominal cross section
  6 mm²
• Insulating material
  PA
• Rated surge voltage
  6 kV
• Nominal current IN
  10 A (if used as disconnect terminal block. With fuse, the current is determined by the fuse used.)
• Fuse
  G / 6,3 x 32
• Note
  Remove the fuse connector from the basic terminal block before changing the fuse.
• Contact resistance
  Test passed
• Number of levels
  1
• Color
  black
• Overvoltage category
  III
• Nominal voltage UN
  800 V (if used as disconnect terminal block. With fuse, the voltage is determined by the light indicator used.)
• Fuse type
  Glass / ceramics / ...
• Result of power-frequency withstand voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Testing the rated value of the power dissipation (overload and short circuit Protection)
  Test passed
• Temperature cycles
  192
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Width
  12 mm
• Conductor cross section AWG max.
  8
Rated operating voltage
250 V
Degree of pollution
3
Maximum power dissipation
max. 4 W (with single arrangement of the fuse terminal block in the event of overload)
Maximum load current
10 A (if used as disconnect terminal block. With fuse, the current is determined by the fuse used.)
Finger protection
guaranteed
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Result of flexion and pull-out test
Test passed
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
56.5 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27141100
ECLASS 9.0
27141116
ETIM 7.0
EC000899
UNSPSC 6.01
30211825
UNSPSC 18.0
39121410
Number of connections
2
Maximum power dissipation for nominal condition
1.31 W
Connection in acc. with standard
CUL
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Surge voltage test setpoint
4.8 kV
Bending test turns
135
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
86.5 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
ETIM 2.0
EC000899
UNSPSC 7.0901
39121422
Flammability rating according to UL 94
V0
Insulating material group
I
Open side panel
No
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Power frequency withstand voltage setpoint
1.5 kV
Result of aging test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
64 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Stripping length
12 mm
ECLASS 5.0
27141100
ETIM 4.0
EC000899
UNSPSC 11
39121422
UNSPSC 21.0
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section AWG min.
20
Connection method
Spring-cage connection
ECLASS 4.0
27141100
ECLASS 7.0
27141116
ETIM 6.0
EC000899
UNSPSC 12.01
39121422
UNSPSC 20.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
ECLASS 10.0.1
27141116
ECLASS 6.0
27141100
ETIM 3.0
EC000899
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410