3031487 Phoenix Contact Terminal Blocks

Product Details

• Max. AWG conductor cross section, flexible
  10
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  6 mm²
• Conductor cross section AWG min.
  24
• Conductor cross section solid max.
  10 mm²
• Min. AWG conductor cross section, flexible
  24
• End cover width
  2.2 mm
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Number of levels
  1
• ETIM 3.0
  EC000897
• UNSPSC 7.0901
  39121410
• UNSPSC 20.0
  39121410
• Insulating material
  PA
• Maximum load current
  52 A (with 10 mm² conductor cross section)
• Back of the hand protection
  guaranteed
• Finger protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Result of temperature-rise test
  Test passed
• Short-time current
  1.2 kA
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• ASD level
  11.83 (m/s2)2/Hz
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Number of connections
2
Rated surge voltage
8 kV
Overvoltage category
III
Width
8.2 mm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
Color
gray
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
Insulating material group
I
Open side panel
Yes
Power frequency withstand voltage setpoint
2.2 kV
Bending test turns
135
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 4.0
EC000897
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
Nominal cross section
6 mm²
Flammability rating according to UL 94
V0
Degree of pollution
3
Nominal voltage UN
1000 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
ECLASS 4.0
27141100
Potentials
1
Area of application
Railway industry
Maximum power dissipation for nominal condition
1.31 W
Result of power-frequency withstand voltage test
Test passed
ECLASS 5.1
27141100
ECLASS 9.0
27141120
UNSPSC 11
39121410
UNSPSC 21.0
39121410
UNSPSC 18.0
39121410
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
CSA
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Setpoint
5 N
Short circuit stability result
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Nominal current IN
41 A
Result of tight fit on support
Test passed
Tensile test result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
43.5 mm
Height NS 35/15
51 mm
Stripping length
12 mm
Conductor cross section flexible min.
0.2 mm²
Internal cylindrical gage
A5
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
10 mm²
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
69.5 mm
Connection method
Spring-cage connection
Conductor cross section AWG max.
8
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Number of shocks per direction
3
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection
1 level
Permissible humidity (storage/transport)
30 % ... 70 %
Shock duration
18 ms