3033139 Phoenix Contact Terminal Blocks

Product Details

• Insulating material
  PA
• Connection method
  Spring-cage connection
• Nominal voltage UN
  800 V
• Surge voltage test setpoint
  9.8 kV
• Bending test rotation speed
  10 rpm
• Result of flexion and pull-out test
  Test passed
• Setpoint
  5 N
• Short-time current
  0.48 kA
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock test result
  Test passed
• Number of shocks per direction
  3
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• End cover width
  2.2 mm
• Conductor cross section solid min.
  0.08 mm²
• Conductor cross section AWG max.
  10
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• 2 conductors with same cross section, solid max.
  4 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  0.5 mm²
ECLASS 4.0
27141100
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Number of levels
1
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.82 W
Nominal current IN
24 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Tractive force setpoint
20 N
Result of voltage-drop test
Test passed
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
4 mm²
Tightening torque, min
1.5 Nm
Stripping length
8 mm ... 10 mm
Min. AWG conductor cross section, flexible
24
2 conductors with same cross section, stranded min.
0.5 mm²
Internal cylindrical gage
A6
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Nominal cross section
10 mm²
Rated surge voltage
8 kV
Overvoltage category
III
Open side panel
Yes
Power frequency withstand voltage setpoint
2 kV
Conductor cross section tensile test
0.5 mm²
Tight fit on carrier
NS 35
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Static insulating material application in cold
-60 °C
Width
10.3 mm
Height NS 35/7,5
48.3 mm
Height NS 35/15
55.8 mm
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.14 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ECLASS 6.0
27141100
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Number of connections
5
Degree of pollution
3
Connection in acc. with standard
CUL
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Requirements, voltage drop
≤ 1.6 mV
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Screw thread
M4
Conductor cross section AWG min.
24
2 conductors with same cross section, solid min.
0.5 mm²
2 conductors with same cross section, stranded max.
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 2.0
EC000897
ETIM 3.0
EC000897
UNSPSC 20.0
39121410
Color
gray
Insulating material group
I
Maximum load current
24 A
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
4 mm²
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
68 mm
Tightening torque max
1.8 Nm
Conductor cross section flexible min.
0.08 mm²
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 7.0901
39121410