3033155 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Insulating material group
  I
• Open side panel
  Yes
• Bending test rotation speed
  10 rpm
• Tractive force setpoint
  5 N
• Short circuit stability result
  Test passed
• Oscillation, broadband noise test result
  Test passed
• ASD level
  1.857 (m/s2)2/Hz
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Conductor cross section solid min.
  0.14 mm²
• Conductor cross section AWG min.
  26
• Min. AWG conductor cross section, flexible
  26
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  2.5 mm²
• Tightening torque, min
  0.6 Nm
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.14 mm²
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 9.0
  27141120
• ETIM 7.0
  EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Insulating material
PA
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Nominal current IN
30 A (with 4 mm² conductor cross section)
Nominal voltage UN
500 V
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
Number of connections
4
Overvoltage category
III
Flammability rating according to UL 94
V0
Connection method
Screw connection
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Result of tight fit on support
Test passed
Setpoint
1 N
Short-time current
0.72 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 1, class B, body mounted
Acceleration
5g
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
81 mm
End cover width
2.2 mm
Conductor cross section AWG max.
10
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Nominal cross section
4 mm²
Rated surge voltage
8 kV
Connection in acc. with standard
IEC 60947-7-1
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Surge voltage test setpoint
7.3 kV
Bending test turns
135
Conductor cross section tensile test
0.08 mm²
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
6 mm²
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock test result
Test passed
Shock duration
30 ms
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
55.5 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Screw thread
M3
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ECLASS 4.0
27141100
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Number of levels
2
Degree of pollution
3
Maximum load current
36 A (with 6 mm² conductor cross section)
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Requirements, voltage drop
≤ 3.2 mV
Result of thermal test
Test passed
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
6.2 mm
Height NS 35/15
63 mm
Conductor cross section flexible max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Tightening torque max
0.8 Nm
2 conductors with same cross section, stranded max.
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410