3038435 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 11.0
  27141126
• Flammability rating according to UL 94
  V0
• Maximum load current
  20 A (with 4 mm² conductor cross section)
• Result of flexion and pull-out test
  Test passed
• Tight fit on carrier
  NS 35
• Result of voltage-drop test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Height NS 35/7,5
  36.5 mm
• Conductor cross section AWG min.
  28
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.14 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Color
  gray
• Degree of pollution
  3
• Nominal current IN
  20 A (with 4 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Surge voltage test setpoint
  7.3 kV
• Tensile test result
  Test passed
Requirements, voltage drop
≤ 6,4 mV
Short-time current
0.3 kA
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Number of connections
2
Area of application
Railway industry
Overvoltage category
III
Nominal voltage UN
400 V (voltage is determined by the plug used)
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Conductor cross section tensile test
4 mm²
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
60.5 mm
Conductor cross section solid min.
0.08 mm²
Conductor cross section flexible min.
0.08 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Internal cylindrical gage
A3
Nominal cross section
2.5 mm²
Rated surge voltage
6 kV
Connection in acc. with standard
CSA
Open side panel
Yes
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Result of tight fit on support
Test passed
Setpoint
1 N
Conductor cross section short circuit testing
2.5 mm²
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG max.
12
Stripping length
8 mm ... 10 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 6.0
EC000902
UNSPSC 18.0
39121410
Number of levels
1
Insulating material
PA
Insulating material group
I
Maximum power dissipation for nominal condition
0.77 W
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tractive force setpoint
60 N
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
5.2 mm
Height NS 35/15
44 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Connection method
Spring-cage connection
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141126
ECLASS 6.0
27141100
ETIM 7.0
EC000902
UNSPSC 19.0
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 9.0
27141126
ETIM 4.0
EC000902
UNSPSC 11
39121410
UNSPSC 20.0
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ETIM 3.0
EC000903
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
ECLASS 7.0
27141126
ETIM 2.0
EC000903
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410