3038516 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  2
• Flammability rating according to UL 94
  V0
• Connection in acc. with standard
  CSA
• Open side panel
  Yes
• Finger protection
  guaranteed
• Result of surge voltage test
  Test passed
• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Conductor cross section tensile test
  4 mm²
• Tight fit on carrier
  NS 35
• Result of tight fit on support
  Test passed
• Result of voltage-drop test
  Test passed
• Result of aging test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test duration per axis
  2 h
• Relative insulation material temperature index (Elec.; UL 746 B)
  130 °C
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Conductor cross section solid min.
  0.08 mm²
• Conductor cross section flexible min.
  0.08 mm²
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Color
gray
Degree of pollution
3
Insulating material group
I
Maximum load current
26 A (with 4 mm² conductor cross section)
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test turns
135
Tensile test result
Test passed
Setpoint
1 N
Conductor cross section short circuit testing
4 mm²
Short-time current
0.48 kA
Result of thermal test
Test passed
Acceleration
5g
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
5.2 mm
Height NS 35/7,5
47.5 mm
Height NS 35/15
55 mm
Conductor cross section solid max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
Nominal cross section
2.5 mm²
Area of application
Railway industry
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Nominal voltage UN
500 V
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 5.0
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
5 - 150 Hz
Shock form
Half-sine
Shock test result
Test passed
Shock duration
50 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Connection method
Spring-cage connection
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Number of connections
6
Insulating material
PA
Rated surge voltage
6 kV
Overvoltage category
III
Nominal current IN
22 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Surge voltage test setpoint
7.3 kV
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Tractive force setpoint
60 N
Requirements, voltage drop
≤ 3.2 mV
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
91.5 mm
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG max.
12
Stripping length
8 mm ... 10 mm
Internal cylindrical gage
A3
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 2.0
EC000897
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ETIM 4.0
EC000897
ETIM 6.0
EC000897
UNSPSC 21.0
39121410