3045091 Phoenix Contact Terminal Blocks

Product Details

• Result of flexion and pull-out test
  Test passed
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Acceleration
  5g
• Tightening torque, min
  0.5 Nm
• Shock duration
  30 ms
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Potentials
  1
• Width
  5.2 mm
• Height NS 35/15
  55 mm
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Length
  47.7 mm
• Conductor cross section AWG max.
  12
• 2 conductors with same cross section, solid min.
  0.14 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  1.5 mm²
• Stripping length
  9 mm
• Conductor cross section solid max.
  4 mm²
• Internal cylindrical gage
  A3
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height NS 35/7,5
47.5 mm
Conductor cross section solid min.
0.14 mm²
Min. AWG conductor cross section, flexible
26
2 conductors with same cross section, stranded min.
0.14 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid max.
1.5 mm²
ECLASS 5.0
27141100
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Screw thread
M3
Connection in acc. with standard
CSA
Conductor cross section flexible max.
2.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
UNSPSC 19.0
39121410
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Connection method
Screw connection
Tightening torque max
0.6 Nm
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
12
ECLASS 6.0
27141100
Degree of pollution
3
Nominal current IN
24 A
Result of surge voltage test
Test passed
Tensile test result
Test passed
Setpoint
1 N
Result of temperature-rise test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Rated surge voltage
8 kV
Insulating material group
I
Maximum load current
32 A (with 4 mm² conductor cross section)
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
2.2 kV
Bending test turns
135
Tight fit on carrier
NS 35
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Number of connections
2
Flammability rating according to UL 94
V0
Insulating material
PA
Maximum power dissipation for nominal condition
0.77 W
Finger protection
guaranteed
Open side panel
Yes
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
4 mm²
Oscillation, broadband noise test result
Test passed
ASD level
1.857 (m/s2)2/Hz
Shock form
Half-sine
Number of levels
1
Bending test rotation speed
10 rpm
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Nominal cross section
2.5 mm²
Area of application
Railway industry
Overvoltage category
III
Nominal voltage UN
1000 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of power-frequency withstand voltage test
Test passed
Short circuit stability result
Test passed
End cover width
2.2 mm
Color
green
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Static insulating material application in cold
-60 °C
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 12.01
39121410
Number of shocks per direction
3
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Test directions
X-, Y- and Z-axis (pos. and neg.)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.1
27141100
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410