3046362 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Insulating material
  PA
• Degree of pollution
  3
• Maximum power dissipation for nominal condition
  0.77 W
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Tight fit on carrier
  NS 35
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test duration per axis
  5 h
• Shock duration
  18 ms
• Bending test rotation speed
  10 (+/- 2) rpm
• Setpoint
  1 N
• Short circuit stability result
  Test passed
• Short-time current
  0.3 kA
• ASD level
  6.12 (m/s2)2/Hz
• Shock form
  Semi-sinusoidal
• Static insulating material application in cold
  -60 °C
• Number of connections
  2
Color
gray
Area of application
Railway industry
Nominal voltage UN
400 V
Open side panel
Yes
Surge voltage test setpoint
7.2 kV
Result of flexion and pull-out test
Test passed
Conductor cross section tensile test
4 mm²
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
5.2 mm
Height NS 35/15
56.6 mm
Connection in acc. with standard
CSA
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 2.0
EC000902
UNSPSC 11
39121410
Number of levels
1
Flammability rating according to UL 94
V0
Insulating material group
I
Maximum load current
20 A (with 4 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Tractive force setpoint
60 N
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Screw connection
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 7.0
27141126
ETIM 7.0
EC000902
UNSPSC 20.0
39121410
Rated surge voltage
6 kV
Overvoltage category
III
Nominal current IN
20 A (with 4 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Requirements, voltage drop
U1 ≤ 6.4 mV; U2 ≤ 1.5 x U1
Conductor cross section short circuit testing
2.5 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Screw thread
M3
Tightening torque, min
0.5 Nm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Internal cylindrical gage
A3
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ECLASS 9.0
27141126
ETIM 6.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
57.8 mm
Tightening torque max
0.6 Nm
Conductor cross section solid max.
4 mm²
Min. AWG conductor cross section, flexible
26
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141126
ECLASS 5.0
27141100
ETIM 4.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height NS 35/7,5
49.1 mm
Stripping length
9 mm
Conductor cross section AWG max.
12
Conductor cross section flexible max.
4 mm²
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141126
ECLASS 6.0
27141100
ETIM 3.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410