3058172 Phoenix Contact Terminal Blocks
Part#:3058172
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 40
Dec 25, 2024
Test disconnect terminal block, cross section: 0.1 - 6 mm², AWG: 26 - 8, width 13 mm, color: gray
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3058172 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Color gray
- Overvoltage category III
- Open side panel Yes
- Result of surge voltage test Test passed
- Setpoint 5 N
- Conductor cross section short circuit testing 10 mm²
- Number of connections 2
- Degree of pollution 3
- Potentials 1
- Rated surge voltage 8 kV
- Maximum power dissipation for nominal condition 1.82 W
- Maximum load current 50 A (with 10 mm² conductor cross section)
- Nominal voltage UN 800 V (with open 630 V disconnect point)
- Power frequency withstand voltage setpoint 1.89 kV
- Result of tight fit on support Test passed
- Short circuit stability result Test passed
- Result of thermal test Test passed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Number of shocks per direction 3
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- End cover width 2.2 mm
- Pitch 13 mm
- Nominal cross section 10 mm²
- Insulating material PA
- Insulating material group I
- Back of the hand protection guaranteed
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Result of voltage-drop test Test passed
- Short-time current 1.2 kA
- Oscillation, broadband noise test result Test passed
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Width 13 mm
- Connection 1 level
- Cable lug connection according to standard DIN 46237:1970-07
- Max. cross section for cable lug connection 6 mm²
- Bolt diameter 5 mm
- Tightening torque, min 2 Nm
- Permissible humidity (storage/transport) 30 % ... 70 %
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 11.0 27141126
- ECLASS 5.0 27141100
- ETIM 2.0 EC000902
- UNSPSC 7.0901 39121410
- UNSPSC 11 39121410
- Number of levels 1
- Flammability rating according to UL 94 V0
- Nominal current IN 50 A
- Result of power-frequency withstand voltage test Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Test spectrum Service life test category 2, bogie-mounted
- Test duration per axis 5 h
- Static insulating material application in cold -60 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Height NS 35/15 57.3 mm
- Height NS 32 54.8 mm
- Connection in acc. with standard UL
- AWG min 20
- Shock protection test specification IEC 60529:2001-02
- Tight fit on carrier NS 32/NS 35
- Result of temperature-rise test Test passed
- ASD level 6.12 (m/s2)2/Hz
- Shock form Half-sine
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Height NS 35/7,5 49.8 mm
- Connection method Bolt connection
- Cable lug width, max. 10 mm
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 10.0.1 27141126
- ECLASS 9.0 27141126
- ETIM 4.0 EC000902
- UNSPSC 6.01 30211811
- UNSPSC 18.0 39121410
- UNSPSC 21.0 39121410
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Acceleration 30g
- Shock test result Test passed
- Shock duration 18 ms
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Length 79.9 mm
- Screw thread M5
- AWG max 10
- Tightening torque max 22 Nm
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 27141100
- ECLASS 6.0 27141100
- ETIM 3.0 EC000902
- ETIM 7.0 EC000902
- UNSPSC 13.2 39121410
- UNSPSC 19.0 39121410
- Stripping length The stripping length depends on the specification provided by the cable lug manufacturer.
- Min. cross section for cable lug connection 0.5 mm²
- Hole diameter, min. 5.3 mm
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 5.1 27141100
- ECLASS 4.1 27141100
- ECLASS 7.0 27141126
- ETIM 6.0 EC000902
- UNSPSC 12.01 39121410
- UNSPSC 20.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$3.42
Stock:
40
Select Qty:
$3.42
$3.42 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
