3058059 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Maximum power dissipation for nominal condition
  1.82 W
• Nominal voltage UN
  1000 V
• Result of temperature-rise test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Shock test result
  Test passed
• Shock duration
  30 ms
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Length
  53.3 mm
• Stripping length
  The stripping length depends on the specification provided by the cable lug manufacturer.
• Screw thread
  M5
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141100
• ECLASS 6.0
  27141100
• ETIM 4.0
  EC000897
• UNSPSC 7.0901
  39121410
• UNSPSC 18.0
  39121410
• UNSPSC 19.0
  39121410
• Potentials
  1
Flammability rating according to UL 94
V0
Degree of pollution
3
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Short-time current
1.2 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
5g
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection
1 level
Cable lug connection according to standard
DIN 46237:1970-07
Min. cross section for cable lug connection
0.5 mm²
Hole diameter, min.
5.3 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Number of levels
1
Insulating material
PA
Insulating material group
I
Nominal current IN
57 A
Result of power-frequency withstand voltage test
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
1.857 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
13 mm
Height NS 35/15
54.5 mm
Height NS 32
52 mm
AWG min
20
Bolt diameter
5 mm
Tightening torque, min
2 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ETIM 2.0
EC000897
ETIM 6.0
EC000897
ETIM 3.0
EC000897
UNSPSC 21.0
39121410
Number of connections
2
Overvoltage category
III
Result of surge voltage test
Test passed
Tight fit on carrier
NS 32/NS 35
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
End cover width
2.2 mm
Connection method
Bolt connection
AWG max
10
Tightening torque max
2.2 Nm
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 11
39121410
Nominal cross section
10 mm²
Rated surge voltage
8 kV
Maximum load current
57 A (with 10 mm² conductor cross section)
Power frequency withstand voltage setpoint
2 kV
Result of tight fit on support
Test passed
Setpoint
5 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
10 mm²
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
47 mm
Pitch
13 mm
Connection in acc. with standard
CUL
Max. cross section for cable lug connection
6 mm²
Cable lug width, max.
10 mm