3072804 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Nominal cross section
  6 mm²
• Rated surge voltage
  6 kV
• Nominal current IN
  41 A
• Maximum power dissipation for nominal condition
  1.31 W
• Bending test turns
  135
• Result of tight fit on support
  Test passed
• Setpoint
  5 N
• Result of thermal test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  30g
• Number of shocks per direction
  3
• Static insulating material application in cold
  -60 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Width
  8.2 mm
• Height NS 32
  71 mm
• Note
  Terminal point
• Conductor cross section flexible min.
  0.5 mm²
• 2 conductors with same cross section, stranded min.
  0.5 mm²
• Color
  gray
Overvoltage category
III
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 32/NS 35
Result of temperature-rise test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
73.5 mm
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
2 conductors with same cross section, solid min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A5
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ECLASS 4.0
27141100
Number of levels
1
Flammability rating according to UL 94
V0
Connection in acc. with standard
IEC 60947-7-1
Nominal voltage UN
500 V
Surge voltage test setpoint
7.3 kV
Result of power-frequency withstand voltage test
Test passed
Tractive force setpoint
90 N
Result of voltage-drop test
Test passed
Short-time current
1.2 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Insulating material
PA
Insulating material group
I
Maximum load current
57 A (with 10 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Requirements, voltage drop
≤ 6,4 mV
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
66 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
2 conductors with same cross section, stranded max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Degree of pollution
3
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Conductor cross section tensile test
10 mm²
Conductor cross section short circuit testing
10 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Connection method
Screw connection
Stripping length
10 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141126
ECLASS 6.0
27141100
ETIM 2.0
EC000902
ETIM 6.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
66.5 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, solid max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Tightening torque max
1.6 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 7.0
27141126
ETIM 4.0
EC000902
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
2.5 mm²
Tightening torque, min
1.5 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
Screw thread
M4
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 5.1
27141100
ECLASS 9.0
27141126
ETIM 7.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
ETIM 3.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 11
39121410