3072815 Phoenix Contact Terminal Blocks

Product Details

• End cover width
  2.2 mm
• Requirements, voltage drop
  ≤ 6,4 mV
• Oscillation, broadband noise test result
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Nominal cross section
  6 mm²
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Nominal current IN
  41 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Back of the hand protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Tensile test result
  Test passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Number of connections
  2
• Rated surge voltage
  8 kV
• Maximum load current
  50 A (with 10 mm² conductor cross section)
• Surge voltage test setpoint
  9.8 kV
• Bending test turns
  135
Bending test rotation speed
10 rpm
Temperature-rise test
Test passed
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
8.2 mm
Height NS 32
58 mm
Conductor cross section AWG min.
24
Stripping length
12 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 7.0
27141126
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
Degree of pollution
3
Overvoltage category
III
Nominal voltage UN
1000 V (Rated voltage for open disconnect point 500 V)
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of tight fit on support
Test passed
Connection method
Screw connection
Tightening torque max
1.8 Nm
Tightening torque bridge thread
0.5 Nm ... 0.6 Nm (M3 thread)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ETIM 3.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Number of levels
1
Insulating material
PA
Connection in acc. with standard
IEC 60947-7-1
Finger protection
guaranteed
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 9.0
27141126
ETIM 4.0
EC000902
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Color
gray
Maximum power dissipation for nominal condition
1.31 W
Open side panel
Yes
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC000902
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Note
Terminal point
Screw thread
M4
Tightening torque, min
1.5 Nm
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27141126
ECLASS 5.0
27141100
ETIM 7.0
EC000902
UNSPSC 18.0
39121410
Conductor cross section solid min.
0.2 mm²
Power frequency withstand voltage setpoint
2.2 kV
Tractive force setpoint
90 N
Tight fit on carrier
NS 32/NS 35
Short circuit stability result
Test passed
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Conductor cross section flexible min.
0.2 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Conductor cross section tensile test
10 mm²
Conductor cross section short circuit testing
10 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Result of flexion and pull-out test
Test passed
Setpoint
5 N
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
105.2 mm
Height NS 35/7,5
53 mm
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Short-time current
1.2 kA
Test spectrum
Service life test category 2, bogie-mounted
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Height NS 35/15
60.5 mm
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
2 conductors with same cross section, solid max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section AWG max.
8
Conductor cross section solid max.
10 mm²