3211786 Phoenix Contact Terminal Blocks

Product Details

• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of tight fit on support
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Height NS 35/7,5
  47.5 mm
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• Power frequency withstand voltage setpoint
  1.89 kV
• Conductor cross section short circuit testing
  4 mm²
• Result of thermal test
  Test passed
• ECLASS 11.0
  27141120
• ECLASS 4.0
  27141100
• ECLASS 9.0
  27141120
• ETIM 6.0
  EC000897
• UNSPSC 11
  39121410
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 7.0
  27141120
• UNSPSC 6.01
  30211811
• UNSPSC 19.0
  39121410
• Tight fit on carrier
  NS 35
• Ageing test for screwless modular terminal block temperature cycles
  192
Stripping length
10 mm ... 12 mm
ECLASS 5.1
27141100
ETIM 3.0
EC000897
Bending test turns
135
ECLASS 4.1
27141100
ETIM 2.0
EC000897
UNSPSC 20.0
39121410
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ECLASS 6.0
27141100
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Result of surge voltage test
Test passed
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Result of flexion and pull-out test
Test passed
Short circuit stability result
Test passed
ETIM 4.0
EC000897
Number of connections
4
Flammability rating according to UL 94
V0
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
End cover width
2.2 mm
Conductor cross section solid max.
6 mm²
Number of levels
2
Area of application
Railway industry
Nominal voltage UN
500 V
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Internal cylindrical gage
A4
Nominal cross section
4 mm²
Rated surge voltage
6 kV
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Test duration per axis
5 h
Surface flammability NFPA 130 (ASTM E 162)
passed
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
6.2 mm
Height NS 35/15
55 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
83.5 mm
Conductor cross section flexible min.
0.2 mm²
Shock form
Semi-sinusoidal
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
ASD level
6.12 (m/s2)2/Hz
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Overvoltage category
III
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Insulating material
PA
Oscillation, broadband noise test result
Test passed
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Degree of pollution
3
Insulating material group
I
Maximum load current
32 A (with 6 mm² conductor cross section, rigid)
Open side panel
Yes
Finger protection
guaranteed
UNSPSC 18.0
39121410
Number of positions
2
UNSPSC 21.0
39121410
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Color
gray
Connection in acc. with standard
CSA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Short-time current
0.48 kA
UNSPSC 7.0901
39121410
Nominal current IN
28 A (with 4 mm² conductor cross section)
Result of power-frequency withstand voltage test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ETIM 7.0
EC000897