3211813 Phoenix Contact Terminal Blocks

Product Details

• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Connection
  1 level
• Connection in acc. with standard
  CSA
• Conductor cross section AWG max.
  8
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  1 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Connection cross sections directly pluggable
  1 mm² 10 mm² 16 8
• Power frequency withstand voltage setpoint
  2.2 kV
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Setpoint
  5 N
• Requirements, voltage drop
  U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
• Back of the hand protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tractive force setpoint
  90 N
• Result of aging test
  Test passed
• Conductor cross section flexible min.
  0.5 mm²
• Conductor cross section solid max.
  10 mm²
• Internal cylindrical gage
  A5
• Permissible humidity (storage/transport)
  30 % ... 70 %
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Potentials
1
Rated surge voltage
8 kV
Surge voltage test setpoint
9.8 kV
Result of flexion and pull-out test
Test passed
Conductor cross section tensile test
10 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height NS 35/7,5
43.5 mm
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Height
42.2 mm
Stripping length
10 mm ... 12 mm
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid min.
1 mm²
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm² When using TWIN ferrules, we recommend a minimum ferrule length of 13 mm.
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ECLASS 6.0
27141100
Number of levels
1
Flammability rating according to UL 94
V0
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Short-time current
0.72 kA
Result of thermal test
Test passed
Width
8.2 mm
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
57.7 mm
Height NS 35/15
51 mm
Conductor cross section flexible max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ETIM 7.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
ECLASS 4.0
27141100
ETIM 2.0
EC000897
ETIM 3.0
EC000897
UNSPSC 20.0
39121410
ECLASS 5.1
27141100
ETIM 4.0
EC000897
ECLASS 9.0
27141120
UNSPSC 18.0
39121410
UNSPSC 11
39121410
Number of connections
2
Insulating material group
I
Open side panel
Yes
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Surface flammability NFPA 130 (ASTM E 162)
passed
Insulating material
PA
Nominal current IN
41 A
Tight fit on carrier
NS 35
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Number of shocks per direction
3
Number of positions
1
Color
gray
Degree of pollution
3
Maximum load current
52 A (with 10 mm² conductor cross section, rigid)
Conductor cross section short circuit testing
6 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock form
Half-sine
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
ECLASS 5.0
27141100
UNSPSC 7.0901
39121410
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Nominal voltage UN
1000 V
ASD level
6.12 (m/s2)2/Hz
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
Nominal cross section
6 mm²
Test spectrum
Service life test category 2, bogie-mounted
Shock duration
18 ms
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Area of application
Railway industry
Maximum power dissipation for nominal condition
1.31 W
Result of temperature-rise test
Test passed
UNSPSC 13.2
39121410