3211870 Phoenix Contact Terminal Blocks

Product Details

• Flammability rating according to UL 94
  V0
• Maximum power dissipation
  max. 2.5 W (with single arrangement of the fuse terminal block in the event of overload)
• Maximum load current
  10 A (the current is determined by the fuse used)
• Open side panel
  No
• Power frequency withstand voltage setpoint
  1.5 kV
• Actuatiing forces on plug in or lever in fuse insert carriers
  Test passed
• Testing the rated value of the power dissipation (overload and short circuit Protection)
  Test passed
• Result of aging test
  Test passed
• Nominal cross section
  6 mm²
• Degree of pollution
  3
• Fuse
  G / 6,3 x 32
• Result of power-frequency withstand voltage test
  Test passed
• Compatibitity between modular fuse terminal block and fuse insert
  Test passed
• Testing the rated value of the power dissipation (exclusively short circuit protection)
  Test passed
• Oscillation, broadband noise test result
  Test passed
• ASD level
  0.964 (m/s2)2/Hz
• Shock duration
  30 ms
• ECLASS 11.0
  27141116
• ECLASS 9.0
  27141116
• UNSPSC 11
  39121410
UNSPSC 19.0
39121410
Number of levels
1
Color
black
Maximum power dissipation for nominal condition
1.31 W
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-3
Nominal voltage UN
630 V
Fuse type
Glass / ceramics / ...
Contact resistance
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of flexion and pull-out test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Note
Swing the locking lever to its final position before replacing the fuse.
Rated surge voltage
6 kV
Nominal current IN
10 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Result of tight fit on support
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000899
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Number of connections
2
Insulating material
PA
Rated operating voltage
400 V
Overvoltage category
III
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
7.3 kV
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Shock test result
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
End cover width
2.2 mm
Length
74.5 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Internal cylindrical gage
A5
ECLASS 5.0
27141100
ETIM 2.0
EC000897
ETIM 6.0
EC000899
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Height NS 35/15
76.5 mm
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Connection method
Push-in connection
ECLASS 4.1
27141100
ECLASS 7.0
27141116
ETIM 7.0
EC000899
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Stripping length
10 mm ... 12 mm
ECLASS 10.0.1
27141116
ECLASS 5.1
27141100
ETIM 3.0
EC000899
UNSPSC 12.01
39121410
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section solid max.
10 mm²
Conductor cross section AWG min.
20
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Conductor cross section flexible min.
0.5 mm²
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
8.2 mm
Height NS 35/7,5
69 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm² When using TWIN ferrules, we recommend a minimum ferrule length of 13 mm.
Acceleration
5g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Conductor cross section AWG max.
8
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
61.5 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Test duration per axis
5 h
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Ambient temperature (assembly)
-5 °C ... 70 °C