3211888 Phoenix Contact Terminal Blocks

Product Details

• Color
  black
• Insulating material group
  I
• Nominal voltage UN
  24 V
• Fuse type
  Glass / ceramics / ...
• Overvoltage category
  III
• LED voltage range
  12 V AC/DC ... 30 V AC/DC
• Maximum load current
  32 A (bei 6 mm² Leiterquerschnitt starr)
• ECLASS 5.1
  27141100
• Number of connections
  4
• Rated surge voltage
  6 kV
• Result of power-frequency withstand voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of aging test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  5g
• Shock form
  Half-sine
• Note
  Swing the locking lever to its final position before replacing the fuse.
• Insulating material
  PA
• Rated operating voltage
  24 V
• Maximum power dissipation
  max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
Nominal current IN
28 A
Fuse
G / 5 x 20
Back of the hand protection
guaranteed
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Temperature cycles
192
Test duration per axis
5 h
Number of shocks per direction
3
Shock duration
30 ms
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
6.2 mm
Height NS 35/7,5
75.5 mm
Conductor cross section solid min.
0.2 mm²
Nominal cross section
4 mm²
Degree of pollution
3
LED current range
0.31 mA ... 0.95 mA
Connection in acc. with standard
IEC 60947-7-1
Maximum load current (upper level)
6.3 A (the current is determined by the fuse used)
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Bending test rotation speed
10 rpm
Result of thermal test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection method
Push-in connection
ECLASS 11.0
27141116
ECLASS 5.0
27141100
ECLASS 7.0
27141116
ETIM 6.0
EC000899
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of levels
2
Flammability rating according to UL 94
V0
Nominal current IN (upper level)
6.3 A
Power frequency withstand voltage setpoint
1.5 kV
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ECLASS 9.0
27141116
ETIM 7.0
EC000899
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Open side panel
No
Surge voltage test setpoint
4 kV
Result of flexion and pull-out test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
ECLASS 4.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
102.9 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
ECLASS 10.0.1
27141116
ECLASS 6.0
27141100
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Finger protection
guaranteed
Bending test turns
135
ASD level
0.964 (m/s2)2/Hz
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 35/15
83 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Conductor cross section AWG max.
10
Internal cylindrical gage
A4
ETIM 2.0
EC000897
ETIM 4.0
EC000899
Maximum power dissipation for nominal condition
1.02 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Contact resistance
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Ambient temperature (assembly)
-5 °C ... 70 °C
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Stripping length
10 mm ... 12 mm
ETIM 3.0
EC000899
UNSPSC 6.01
30211811