3214320 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  3
• Maximum power dissipation for nominal condition
  1.6 W (the value is multiplied when connecting multiple levels)
• Maximum power dissipation
  max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
• Nominal voltage UN
  500 V (the voltage is determined by the fuse used)
• Fuse type
  Glass / ceramics / ...
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Compatibitity between modular fuse terminal block and fuse insert
  Test passed
• Bending test rotation speed
  10 rpm
• Testing the rated value of the power dissipation (exclusively short circuit protection)
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  5g
• Shock test result
  Test passed
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Number of connections
  5
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
• ECLASS 10.0.1
  27141116
• ECLASS 4.0
  27141100
• ETIM 4.0
  EC000899
UNSPSC 20.0
39121410
Color
black
Rated surge voltage
6 kV
Rated operating voltage
250 V
Maximum load current
36 A (with 6 mm² conductor cross section)
Fuse
G / 5 x 20
Back of the hand protection
guaranteed
Contact resistance
Test passed
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
ASD level
0.964 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
96.4 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section solid min.
0.14 mm²
Stripping length
9 mm
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Tightening torque, min
0.6 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ECLASS 4.1
27141100
UNSPSC 18.0
39121410
Note
Please observe the current carrying capacity of the DIN rails.
Insulating material
PA
Overvoltage category
III
Nominal current IN
28 A (with 4 mm² conductor cross section)
Nominal current IN (upper level)
6.3 A
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock form
Half-sine
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
6 mm²
ECLASS 11.0
27141116
ECLASS 7.0
27141116
ETIM 7.0
EC000899
Nominal cross section
4 mm²
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-2/IEC 60947-7-3
Maximum load current (upper level)
6.3 A (the current is determined by the fuse used)
Open side panel
No
Result of tight fit on support
Test passed
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test turns
135
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Shock duration
30 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
94.5 mm
Height NS 35/7,5
88.9 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Screw thread
M3
Permissible humidity (storage/transport)
30 % ... 70 %
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
UNSPSC 13.2
39121410
ETIM 6.0
EC000899
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
6.2 mm
Length
92.7 mm
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Connection method
Screw connection
Tightening torque max
0.8 Nm
Internal cylindrical gage
A4
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 9.0
27141116
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410