3214325 Phoenix Contact Terminal Blocks

Product Details

• Fuse
  G / 5 x 20
• Nominal current IN
  30 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
• Insulating material group
  I
• Number of connections
  4
• Rated surge voltage
  6 kV
• Degree of pollution
  3
• Connection in acc. with standard
  CUL
• Maximum load current (upper level)
  6.3 A (the current is determined by the fuse used)
• Open side panel
  No
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test rotation speed
  10 rpm
• Testing the rated value of the power dissipation (exclusively short circuit protection)
  Test passed
• Result of temperature-rise test
  Test passed
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Number of shocks per direction
  3
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
Height NS 35/7,5
88.9 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
ECLASS 5.0
27141100
Note
Swing the locking lever to its final position before replacing the fuse.
Insulating material
PA
Maximum power dissipation for nominal condition
0.9 W (the value is multiplied when connecting multiple levels)
Finger protection
guaranteed
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Oscillation, broadband noise test result
Test passed
ASD level
0.964 (m/s2)2/Hz
Shock form
Half-sine
Shock duration
30 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height
94.5 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ETIM 6.0
EC000899
ETIM 7.0
EC000899
UNSPSC 20.0
39121410
Number of levels
2
Color
black
Rated operating voltage
250 V
Maximum power dissipation
max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
Nominal current IN (upper level)
6.3 A
Fuse type
Glass / ceramics / ...
Contact resistance
Test passed
Result of flexion and pull-out test
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
5g
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
92.7 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section AWG max.
10
2 conductors with same cross section, stranded max.
1.5 mm²
Stripping length
9 mm
Connection method
Screw connection
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
Nominal cross section
4 mm²
Flammability rating according to UL 94
V0
Overvoltage category
III
Maximum load current
36 A (the current is determined by the fuse used)
Nominal voltage UN
500 V (the voltage is determined by the fuse used)
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Bending test turns
135
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
6.2 mm
Height NS 35/15
96.4 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Screw thread
M3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 4.0
EC000901
UNSPSC 19.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Tightening torque max
0.8 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 9.0
27141116
UNSPSC 18.0
39121410
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Tightening torque, min
0.6 Nm
ECLASS 10.0.1
27141116
ECLASS 11.0
27141116
ECLASS 7.0
27141116
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410