3244410 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  1.5 mm²
• Degree of pollution
  3
• Insulating material group
  I
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  1.5 kV
• Result of power-frequency withstand voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Result of voltage-drop test
  Test passed
• Result of thermal test
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  30g
• Shock test result
  Test passed
• Number of shocks per direction
  3
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Length
  74.4 mm
• Height NS 35/7,5
  41.5 mm
• Stripping length
  8 mm ... 10 mm
• Conductor cross section AWG max.
  14
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm²
Connection cross sections directly pluggable
0.25 mm² 1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ECLASS 9.0
27141128
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Number of levels
2
Insulating material
PA
Maximum load current
13.5 A
Nominal voltage UN
250 V
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Bending test turns
135
Setpoint
1 N
Conductor cross section short circuit testing
1.5 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
3.5 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Min. AWG conductor cross section, flexible
26
Internal cylindrical gage
A1 / B1
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Number of connections
4
Color
gray
Flammability rating according to UL 94
V0
Rated surge voltage
4 kV
Open side panel
Yes
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Tensile test result
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/15
49 mm
Conductor cross section AWG min.
26
Conductor cross section flexible max.
1.5 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141128
ECLASS 7.0
27141128
ETIM 4.0
EC000897
ETIM 7.0
EC000900
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Potentials
3
Overvoltage category
III
Maximum power dissipation for nominal condition
0.56 W (the value is multiplied when connecting multiple levels)
Nominal current IN
13.5 A
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Short-time current
0.18 kA
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid min.
0.25 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141128
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC000900
UNSPSC 18.0
39121410