3244559 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Insulating material
  PA
• Rated surge voltage
  4 kV
• Overvoltage category
  III
• Open side panel
  Yes
• Bending test turns
  135
• Setpoint
  1 N
• Conductor cross section short circuit testing
  4 mm²
• Result of thermal test
  Test passed
• Test duration per axis
  5 h
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• End cover width
  2.2 mm
• Note
  Please observe the current carrying capacity of the DIN rails.
• Conductor cross section flexible min.
  0.2 mm²
• Max. AWG conductor cross section, flexible
  14
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.34 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 7.0
  27141128
• ECLASS 6.0
  27141100
ETIM 6.0
EC000900
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Maximum load current
20 A
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
10 s
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Height NS 35/15
49 mm
Conductor cross section AWG min.
24
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
Nominal cross section
2.5 mm²
Degree of pollution
3
Nominal current IN
20 A
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Short-time current
0.36 kA
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Width
7 mm
Length
74.4 mm
Conductor cross section solid min.
0.34 mm²
Number of levels
2
Flammability rating according to UL 94
V0
Insulating material group
I
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Height NS 35/7,5
41.5 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141128
ECLASS 5.0
27141100
ECLASS 9.0
27141128
ETIM 7.0
EC000900
UNSPSC 11
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
Potentials
2
Color
orange
Nominal voltage UN
250 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.5 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Connection method
Push-in connection
Stripping length
8 mm ... 10 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141128
ECLASS 4.1
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410