3270159 Phoenix Contact Terminal Blocks

Product Details

• Maximum load current
  24 A (per chamber with 2.5 mm² conductor cross section)
• Nominal voltage UN
  250 V
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Result of voltage-drop test
  Test passed
• Conductor cross section short circuit testing
  2.5 mm²
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Potentials
  1
• Insulating material group
  I
• Nominal cross section
  1.5 mm²
• Insulating material
  PA
• Overvoltage category
  III
• Nominal current IN
  17.5 A (with 1.5 mm² conductor cross section)
• Back of the hand protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Tight fit on carrier
  NS 35
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 6.0
EC000897
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
95 mm
Width
8.3 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Number of positions
2
Color
gray
Flammability rating according to UL 94
V0
Power frequency withstand voltage setpoint
1.5 kV
Result of flexion and pull-out test
Test passed
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
ECLASS 5.0
27141100
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Short-time current
0.3 kA
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Number of connections
32
Rated surge voltage
4 kV
Maximum total current
37 A (per potential distributor)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection
1st, 2nd, 3rd, 4th, 5th, 6th, 7th and 8th level
Conductor cross section AWG min.
26
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Number of levels
8
Color of connection elements
black
Maximum power dissipation for nominal condition
0.56 W (the value is multiplied when connecting multiple levels)
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Setpoint
1 N
Result of thermal test
Test passed
Result of aging test
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
87.5 mm
Connection method
Push-in connection
Conductor cross section AWG max.
14
Max. AWG conductor cross section, flexible
14
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
UNSPSC 18.0
39121410
Acceleration
30g
Shock duration
18 ms
Static insulating material application in cold
-60 °C
ECLASS 11.0
27141120
ECLASS 7.0
27141120
UNSPSC 20.0
39121410
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
100 mm
Conductor cross section solid min.
0.34 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C