3270160 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 11.0
  27141141
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Result of thermal test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height NS 35/15
  95 mm
• Potentials
  1
• Rated surge voltage
  4 kV
• Nominal current IN
  32 A (Supply, for 4 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
• Setpoint
  1 N
• Conductor cross section short circuit testing
  6 mm²
• Number of connections
  29
• Insulating material
  PA
• Overvoltage category
  III
• Maximum total current
  37 A (per potential distributor)
• Finger protection
  guaranteed
Power frequency withstand voltage setpoint
1.5 kV
Bending test rotation speed
10 rpm
UNSPSC 20.0
39121410
Color
gray
Flammability rating according to UL 94
V0
Maximum load current
37 A (Service Entrance)
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tight fit on carrier
NS 35
Short-time current
0.72 kA
Test spectrum
Service life test category 2, bogie-mounted
UNSPSC 19.0
39121410
Number of levels
8
Nominal cross section
1.5 mm²
Color of connection elements
black
Insulating material group
I
Open side panel
Yes
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Length
100 mm
UNSPSC 21.0
39121410
Test duration per axis
5 h
Number of positions
2
Nominal cross section feed-in
4 mm²
Maximum power dissipation for nominal condition
0.56 W (the value is multiplied when connecting multiple levels)
Nominal voltage UN
250 V
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height NS 35/7,5
87.5 mm
Connection in acc. with standard
IEC 60947-7-1
UNSPSC 13.2
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Result of voltage-drop test
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Conductor cross section AWG min.
24
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Static insulating material application in cold
-60 °C
Connection method
Push-in connection
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ETIM 6.0
EC000901
UNSPSC 7.0901
39121410
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Number of shocks per direction
3
Stripping length
10 mm ... 12 mm
Conductor cross section solid max.
6 mm²
Note
Only the “CRIMPFOX 6” crimping pliers may be used for crimping with 6 mm² stranded and ferrule.
ECLASS 10.0.1
27141141
ETIM 3.0
EC000901
UNSPSC 6.01
30211811
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
8.3 mm
Conductor cross section solid min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141100
ETIM 7.0
EC000901
UNSPSC 11
39121410
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section AWG max.
10
Max. AWG conductor cross section, flexible
10
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
Connection
Feed-in stage
ECLASS 5.0
27141100
ECLASS 7.0
27141141
ECLASS 9.0
27141141
UNSPSC 18.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 4.0
EC000901
UNSPSC 12.01
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3