3273212 Phoenix Contact Terminal Blocks
Part#:3273212
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 805
Dec 23, 2024
Distribution block, Block with horizontal alignment and integrated supply, The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 690 V, nominal current: 24 A, connection metho
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at marketplace.quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3273212 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Note The max. load current must not be exceeded by the total current of all connected conductors.
- Nominal cross section 2.5 mm²
- Number of levels 1
- Color black
- Insulating material group I
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Result of surge voltage test Test passed
- Potentials 1
- Insulating material PA
- Rated surge voltage 8 kV
- Maximum load current 57 A (with 10 mm² conductor cross section)
- Finger protection guaranteed
- Result of power-frequency withstand voltage test Test passed
- Short-time current 1.2 kA
- Nominal cross section feed-in 6 mm²
- Maximum power dissipation for nominal condition 1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- UNSPSC 6.01 30211811
- UNSPSC 11 39121410
- UNSPSC 18.0 39121410
- UNSPSC 21.0 39121410
- Number of connections 7
- Degree of pollution 3
- Maximum total current 57 A (with 10 mm² conductor cross section)
- Nominal current IN 41 A (with 6 mm² conductor cross section)
- Bending test turns 135
- Tight fit on carrier NS 35
- Overvoltage category III
- Nominal voltage UN 690 V
- Back of the hand protection guaranteed
- Power frequency withstand voltage setpoint 1.89 kV
- Tensile test result Test passed
- Short circuit stability result Test passed
- Result of temperature-rise test Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Number of shocks per direction 3
- ECLASS 9.0 27141120
- ECLASS 6.0 27141100
- ETIM 4.0 EC000897
- ETIM 7.0 EC000897
- UNSPSC 19.0 39121410
- Conductor cross section AWG min. 20
- Conductor cross section flexible max. 10 mm²
- ECLASS 11.0 27141120
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 5.1 27141120
- ECLASS 5.0 27141120
- ETIM 6.0 EC000897
- UNSPSC 13.2 39121410
- UNSPSC 20.0 39121410
- Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm²
- Connection Feed-in stage
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1.5 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ETIM 3.0 EC000897
- ECLASS 7.0 27141120
- UNSPSC 12.01 39121410
- UNSPSC 7.0901 39121410
- Open side panel No
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Result of thermal test Test passed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Acceleration 30g
- Static insulating material application in cold -60 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Stripping length 10 mm ... 12 mm
- Conductor cross section solid min. 1 mm²
- Conductor cross section flexible min. 0.5 mm²
- Internal cylindrical gage A3
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Flammability rating according to UL 94 V0
- Result of flexion and pull-out test Test passed
- Bending test rotation speed 10 rpm
- Result of tight fit on support Test passed
- Conductor cross section short circuit testing 10 mm²
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Width 25.6 mm
- Connection method Push-in connection
- Conductor cross section solid max. 10 mm²
- Min. AWG conductor cross section, flexible 20
- Connection cross sections directly pluggable 1 mm² 10 mm²
- Value 1 mm²
- ECLASS 4.0 27141121
- Bending test conductor cross section/weight 0.5 mm² / 0.3 kg
- Setpoint 5 N
- Result of aging test Test passed
- Oscillation, broadband noise test result Test passed
- ASD level 6.12 (m/s2)2/Hz
- Shock duration 18 ms
- Surface flammability NFPA 130 (ASTM E 162) passed
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Connection in acc. with standard IEC 60947-7-1
- Conductor cross section AWG max. 8
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 4.1 27141121
- Result of voltage-drop test Test passed
- Ageing test for screwless modular terminal block temperature cycles 192
- Test spectrum Service life test category 2, bogie-mounted
- Test duration per axis 5 h
- Shock test result Test passed
- Shock form Half-sine
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Height NS 35/7,5 30.9 mm
- Length 45.7 mm
- Max. AWG conductor cross section, flexible 10
- ECLASS 10.0.1 27141120
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$3.43
Stock:
805
Select Qty:
$3.43
$3.43 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨