3273330 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Insulating material
  PA
• Nominal current IN
  41 A (with 6 mm² conductor cross section)
• Result of thermal test
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Shock test result
  Test passed
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Length
  28.6 mm
• Conductor cross section solid min.
  0.5 mm²
• Conductor cross section AWG max.
  8
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.5 mm²
• Connection cross sections directly pluggable
  0.5 mm² 6 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 11.0
  27141120
• ECLASS 5.1
  27141120
• ETIM 7.0
  EC000897
• UNSPSC 19.0
  39121410
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Static insulating material application in cold
  -60 °C
Connection method
Push-in connection
Connection in acc. with standard
IEC 60998-2-2
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Conductor cross section AWG min.
20
Min. AWG conductor cross section, flexible
20
Connection
Feed-in stage
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141121
ETIM 6.0
EC000897
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Rated surge voltage
6 kV
Open side panel
No
Tight fit on carrier
NS 35/NS 15
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Stripping length
10 mm ... 12 mm
Conductor cross section flexible max.
10 mm²
Internal cylindrical gage
A3
ECLASS 10.0.1
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
Nominal cross section
2.5 mm²
Degree of pollution
3
Maximum total current
57 A (with 10 mm² conductor cross section)
Acceleration
30g
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141121
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Note
When aligning several blocks, it is recommended to either place a DIN rail adapter underneath the connection point or a flange element between the blocks.
Maximum load current
57 A (with 10 mm² conductor cross section)
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Width
25.6 mm
Height
21.7 mm
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Number of connections
7
Color
gray
Insulating material group
I
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Result of tight fit on support
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Value
1 mm²
ECLASS 6.0
27141100
Number of levels
1
Nominal cross section feed-in
6 mm²
Flammability rating according to UL 94
V0
Overvoltage category
III
Nominal voltage UN
450 V
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141120
UNSPSC 12.01
39121410